Table of Contents
Advertisement
Section 2 - Installation
The device can be mounted onto a wall.
1
Align the mounting bracket so that the arrow is pointing up. Use a pencil
/
to make marks in the two holes.
Note: The mounting bracket is attached to the bottom of the device. Turn
the mounting bracket counterclockwise to detach it.
2
/
Use a 6 mm drill bit to drill two 26 mm deep holes over the pencil marks.
3
/
Hammer in the plastic anchors to support the screws.
D-Link DCS-8350LH User Manual
Wall Mount
12
Advertisement
Table of Contents
