Advertisement
Quick Links
INNCOM PC-503
COMMISSIONING
TOOL
Designed to work with the
INNTOOL/EngINN* room control
application, the PC-503 comes
with a USB A Male-to-USB Mini B
Male cable to provide power and
enable communication to a laptop
or personal computer in
the installation and
commissioning process.
SPECIFICATIONS
PARAMETER
PART NUMBER
RF DATA RATE
ANTENNA TYPE
INDOOR RANGE
TRANSMIT POWER
RECEIVE SENSITIVITY
FREQUENCY BAND
ENCRYPTION
PROTOCOL
FREQUENCY CHANNELS
INPUT VOLTAGE
OPERATING AMBIENT TEMPERATURE
LEDs
*IMPORTANT NOTE PC-503 will not work with the INNCOM SNEEZER or any other INNCOM
legacy tool. PC-503 is an RF-only device and does not provide either S5 or IR5 interface.
PC503
201.503
250kbps
SMT
70FT
3mW (+5dBm)
-95dBm
2.4GHz
AES-128
802.15.4
11-26
5VDC (USB)
0°C–40 °C
FLASH TO SHOW TRANSMIT AND RECEIVE
RF FRAMES.
Rx
Tx
The PC-503 LEDs indicate transmission (Tx)
and reception (Rx) with the computer.
Advertisement
Related Manuals for Honeywell INNCOM PC-503
Summary of Contents for Honeywell INNCOM PC-503
- Page 1 INNCOM PC-503 COMMISSIONING TOOL Designed to work with the INNTOOL/EngINN* room control application, the PC-503 comes with a USB A Male-to-USB Mini B Male cable to provide power and enable communication to a laptop or personal computer in the installation and commissioning process.
- Page 2 2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by INNCOM and Honeywell International Inc. can void the user’s authority to operate this device. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.