Travel Mode Switch - Hitachi ZAXIS 30U-5N Operator's Manual

Travel Mode Switch

d
WARNING: Tipping-over accidents can cause serious
personal injury. Do not change travel mode switch
(1) while traveling; especially, changing to fast mode
when descending slopes will create a very dangerous
situation. Always stop the machine before changing
the travel speed mode.
Press the RABBIT mark side on travel mode switch (1) to select
the fast travel mode.
Press the TURTLE mark side on travel mode switch (1) to select
the slow travel mode.
f
NOTE: In cold weather season, when the machine is
traveling with travel mode switch (1) in the fast travel mode
position, the slow travel mode may not automatically be
selected even if the traveling loads increase. This symptom is
not abnormal. Drive the machine after conducting sufficient
warm-up operation.
The slow travel mode will automatically be selected if the
traveling loads increase.
RABBIT mark is displayed on the monitor. Return fast travel
mode if the traveling loads decrease.
If the key switch is turned OFF while the machine is running
at fast speed, the travel mode shifts to slow speed when
restarting the engine.
DRIVING THE MACHINE
4-3
1
MADC-01-003
MADH-01-009