Dell 100 Series Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Dell Manuals
  4. Server
  5. 100 Series
  6. Hardware installation manual

Dell 100 Series Hardware Installation Manual

Hide thumbs Also See for 100 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
100 Series 2U server
Dell EMC VxRack Node
Hardware Installation Guide
P/N 302-002-480
REV 07

Advertisement

Table of Contents
loading

Related Manuals for Dell 100 Series

Summary of Contents for Dell 100 Series

  • Page 1 100 Series 2U server Dell EMC VxRack Node Hardware Installation Guide P/N 302-002-480 REV 07...
  • Page 2 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property of their respective owners. Published in the USA.

  • Page 3: Table Of Contents

    CONTENTS Figures Tables Preface Chapter 1 Before You Begin Conventions used in this document.............12 Where to get help..................12 Site requirements..................13 Hardware acclimation times................ 13 Installing a 2U1N configuration in a 40U cabinet..........14 Installing a 2U4N configuration in a 40U cabinet......... 15 Chapter 2 2U1N Configuration Equipment Installation 2U1N configuration installation guidelines...........
  • Page 4 CONTENTS Three-phase delta wiring for 2U1N configuration ........53 Three-phase wye wiring for 2U1N configuration ........55 Management network wiring for 2U1N configuration .........57 Data network A wiring for 2U1N configuration ...........60 Data network B wiring for 2U1N configuration ...........63 Chapter 5 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Guidelines for wiring a 2U4N configuration in a single-phase cabinet..

  • Page 5: Figures

    FIGURES Cabinet stack up for 2U1N configurations..............19 Removing the inner rail from the slide rail..............22 Correct location for ball bearing retainer assembly............. 24 Aligning the inner rail with white plastic guide block........... 25 Inner rail over the first part of ball bearing retainer assembly........25 Inserting the server in the cabinet................
  • Page 6 FIGURES VxRack Node Hardware Installation Guide...

  • Page 7: Tables

    TABLES Site requirements......................13 Hardware acclimation times (systems and components)..........13 Stack up for a minimum configuration................. 18 Stack up for a maximum configuration................ 18 Mounting kit parts...................... 20 Maximum stack up in cabinets with single-phase power distribution......32 Maximum stack up in cabinets with three-phase delta or 3-phase wye power distribution.........................
  • Page 8 TABLES VxRack Node Hardware Installation Guide...

  • Page 9: Preface

    Preface As part of an effort to improve its product lines, Dell EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use.
  • Page 10 EMC products, go to Dell EMC Online Support at https://support.emc.com. Technical support Go to Dell EMC Online Support and click Service Center. You will see several options for contacting Dell EMC Technical Support. Note that to open a service request, you must have a valid support agreement. Contact your Dell EMC sales representative for details about obtaining a valid support agreement or with questions about your account.

  • Page 11: Before You Begin

    CHAPTER 1 Before You Begin This chapter provides information to obtain assistance and to prepare for the installation. Topics include: Conventions used in this document..............12 Where to get help....................12 Site requirements....................13 Hardware acclimation times................13 Installing a 2U1N configuration in a 40U cabinet..........

  • Page 12: Conventions Used In This Document

    Note To open a service request through the Dell EMC Online Support site, you must have a valid support agreement. Contact your Dell EMC sales representative for details about obtaining a valid support agreement or to answer any questions about your account.

  • Page 13: Site Requirements

    Before You Begin Site requirements Confirm that the customer site meets all requirements before you begin the installation. The following table describes site requirements and provides references to additional information. Table 1 Site requirements Requirement Description Computer room The system requires a properly equipped computer room with controlled temperature and humidity, proper airflow and ventilation, proper power and grounding, system cable routing facilities, and fire equipment.

  • Page 14: Installing A 2U1N Configuration In A 40U Cabinet

    Before You Begin Table 2 Hardware acclimation times (systems and components) (continued) …then let the system or component If the last 24 hours of the acclimate in the new TRANSIT/STORAGE …and the OPERATING environment this many environment was this: environment is this: hours: Nominal 68-72°F Nominal...

  • Page 15: Installing A 2U4N Configuration In A 40U Cabinet

    Before You Begin Installing a 2U4N configuration in a 40U cabinet NOTICE After the installation is complete, you must complete the registration as described Chapter 7 Update the Install Database on page 115 If you are installing a 2U4N configuration, refer to the following chapters in this document: Install the hardware components as described in: 2U4N Configuration Equipment...
  • Page 16 Before You Begin VxRack Node Hardware Installation Guide...

  • Page 17: 2U1N Configuration Equipment Installation

    CHAPTER 2 2U1N Configuration Equipment Installation This chapter provides information for installation of the equipment used in a 2U1N configuration. The chapter contains the following topics: 2U1N configuration installation guidelines............18 Install the 2U1N server in the cabinet..............19 Install the management server in the cabinet.............

  • Page 18: 2U1N Configuration Installation Guidelines

    2U1N Configuration Equipment Installation 2U1N configuration installation guidelines Assuming installation is into an empty rack, always begin component installation at the bottom of the cabinet and work upward. Install components at the lowest available space for that component type. If you are installing the minimum configuration, the stack up will be as follows: Table 3 Stack up for a minimum configuration Component Description...

  • Page 19: Install The 2U1N Server In The Cabinet

    2U1N Configuration Equipment Installation Figure 1 Cabinet stack up for 2U1N configurations Install the 2U1N server in the cabinet CAUTION The server is heavy and should be installed in a rack by two people. To avoid personal injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a mechanical lift and/or help from another person.

  • Page 20: Install The Management Server In The Cabinet

    2U1N Configuration Equipment Installation Procedure 1. Install the slide rails in the cabinet. 2. On both sides of the cabinet, extend the ball bearing and inner rail fully out of the cabinet until they lock in the extended position. Note Mounting posts on each side of the server rest in vertical slots in the inner slide rail.

  • Page 21: Removing Inner Rails From The Rail Assemblies

    2U1N Configuration Equipment Installation Table 5 Mounting kit parts (continued) Component Four Phillips pan-head 8-32 x 0.35 in Stabilize the server and rail mounting screws 1U bezel (application specific) Covers front of server in cabinet CL4887 You need a # 2 Phillips-head screwdriver to complete the installation of the rails and server.

  • Page 22: Attach The Inner Rails To The Server

    2U1N Configuration Equipment Installation Figure 2 Removing the inner rail from the slide rail CL4883 Attach the inner rails to the server Attach an inner rail to each side of the server by performing the procedure that follows for each rail. Procedure 1.
  • Page 23 2U1N Configuration Equipment Installation CL4961 Attach the inner rails to the server...

  • Page 24: Installing The Server On The Rails In The Cabinet

    2U1N Configuration Equipment Installation Installing the server on the rails in the cabinet CAUTION The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a mechanical lift and/or help from another person.

  • Page 25: Aligning The Inner Rail With White Plastic Guide Block

    2U1N Configuration Equipment Installation Note For clarity, Figure 5 shows the inner rail without the server attached. Figure 4 Aligning the inner rail with white plastic guide block CL5093 3. Slide the server into the cabinet so the inner rails extends over the plastic guide blocks and the first part of the ball bearing retainer assemblies.

  • Page 26: Install The Management Switch In The Cabinet

    2U1N Configuration Equipment Installation Figure 6 Inserting the server in the cabinet CL4962 6. To further secure the rail assembly and server in the cabinet, insert and tighten a small stabilizer screw directly behind each bezel latch. Figure 7 Installing the stabilizer screws CL4963 7.

  • Page 27: Configure The Management Switch

    2U1N Configuration Equipment Installation 3. Align one of the inner rails to the mounting position on the management switch. 4. Attach the inner rail to the management switch with the three flat head Philips screws. 5. Repeat previous two steps to attach the inner rail to other side of the management switch.

  • Page 28: Install The Data Switch In The Cabinet

    2U1N Configuration Equipment Installation 8. Login to the switch again , this time the password is Scaleio123 9. Type and click enter. enable 10. Type terminal (or ) to enter global configuration mode. configure config 11. Type to enter interface configuration mode for the interface management 0 virtual interface which accesses management port 1 on the currently active supervisor.

  • Page 29: Configure The Data Switch

    2U1N Configuration Equipment Installation Configure the data switch This procedure is used to configure the data switch. Procedure 1. Copy the configuration filename from the USB flash drive using the following command: enable 2. Then, copy usb1:<configuration file>startup-config Example: localhost> enable locathot>...
  • Page 30 2U1N Configuration Equipment Installation Note Arista switches are by default set to Use Jumbo Frames; no additional configuration is needed on switches for Performance Best Practice. 16. Repeat this procedure if required to configure additional data switches. VxRack Node Hardware Installation Guide...

  • Page 31: 2U4N Configuration Equipment Installation

    CHAPTER 3 2U4N Configuration Equipment Installation This chapter provides information for installation of the equipment used in a 2U4N configuration. The chapter contains the following topics: 2U4N configuration installation guidelines............32 Install the 2U4N server in the cabinet..............35 Install the management server in the cabinet.............

  • Page 32: 2U4N Configuration Installation Guidelines

    2U4N Configuration Equipment Installation 2U4N configuration installation guidelines Assuming installation is into an empty rack, always begin component installation at the bottom of the cabinet and install upward. Install components at the lowest available space for that component type. The quantities of components that can be installed in a cabinet are dependant on the type of power distribution units installed in the cabinet.

  • Page 33: Installation In Cabinets With 3-Phase Delta Or 3-Phase Wye Power Distribution

    2U4N Configuration Equipment Installation Figure 8 Stack up in cabinets with single-phase power distribution Installation in cabinets with 3-phase delta or 3-phase wye power distribution If you are installing the system in a cabinet with 3-phase delta power distribution, the maximum stack up will be as follows: Installation in cabinets with 3-phase delta or 3-phase wye power distribution...

  • Page 34: Maximum Stack Up In Cabinets With Three-Phase Delta Or 3-Phase Wye Power

    2U4N Configuration Equipment Installation Table 7 Maximum stack up in cabinets with three-phase delta or 3-phase wye power distribution Component Description Quantity Cabinet U Space Function Data Server Quanta 2U4N Server 2 - 17 and 26 - 31 Management Server Kylin 1U Server Management Switch Arista 7010T-48...

  • Page 35: Install The 2U4N Server In The Cabinet

    2U4N Configuration Equipment Installation Figure 9 Stack up in cabinets with 3-phase delta or 3-phase wye power distribution Install the 2U4N server in the cabinet There are cabinet slides (left and right). Each cabinets slide consists of the part that is installed in the cabinet (slide rail) and the part that is mounted on the side of the server (inner rail).

  • Page 36: Attaching An Inner Rail To The Server

    2U4N Configuration Equipment Installation 2. Install the slide rails in the cabinet with the hardware provided. 3. Position one of the inner rails on the mounting studs on corresponding side of the replacement chassis. 4. Slide the inner rail forward until it clicks, which locks it in place on the server. Figure 10 Attaching an inner rail to the server 5.

  • Page 37: Correct Location For Ball Bearing Retainer Assembly

    2U4N Configuration Equipment Installation Figure 12 Correct location for ball bearing retainer assembly 8. From the front of the cabinet, align the inner rails attached to the server with the plastic guide block on the front inside of each slide rail. Figure 13 Inner rail over the first part of ball bearing retainer assembly 9.

  • Page 38: Inner Rail Over The First Part Of Ball Bearing Retainer Assembly

    2U4N Configuration Equipment Installation Figure 14 Inner rail over the first part of ball bearing retainer assembly 10. Once the inner rails are properly engaged with the ball bearing retainer assemblies, push the server into the cabinet until the slide rails are engaged and locked.

  • Page 39: Install The Management Server In The Cabinet

    2U4N Configuration Equipment Installation Install the management server in the cabinet Verifying the mounting kit parts Verify that the server mounting kit includes the parts listed in table that follows. Table 8 Mounting kit parts Component 2 universal rail assemblies Attach back to front on either side between (consists of slide rails for connection to the cabinet channels...

  • Page 40: Attach The Inner Rails To The Server

    2U4N Configuration Equipment Installation Figure 16 Removing the inner rail from the slide rail CL4883 Attach the inner rails to the server Attach an inner rail to each side of the server by performing the procedure that follows for each rail. Procedure 1.
  • Page 41 2U4N Configuration Equipment Installation CL4961 Attach the inner rails to the server...

  • Page 42: Installing The Server On The Rails In The Cabinet

    2U4N Configuration Equipment Installation Installing the server on the rails in the cabinet CAUTION The enclosure is heavy and should be installed into or removed from a rack by two people. To avoid personal injury and/or damage to the equipment, do not attempt to lift and install the enclosure into a rack without a mechanical lift and/or help from another person.

  • Page 43: Aligning The Inner Rail With White Plastic Guide Block

    2U4N Configuration Equipment Installation Note For clarity, Figure 5 shows the inner rail without the server attached. Figure 18 Aligning the inner rail with white plastic guide block CL5093 3. Slide the server into the cabinet so the inner rails extends over the plastic guide blocks and the first part of the ball bearing retainer assemblies.

  • Page 44: Install The Management Switch In The Cabinet

    2U4N Configuration Equipment Installation Figure 20 Inserting the server in the cabinet CL4962 6. To further secure the rail assembly and server in the cabinet, insert and tighten a small stabilizer screw directly behind each bezel latch. Figure 21 Installing the stabilizer screws CL4963 7.

  • Page 45: Configure The Management Switch

    2U4N Configuration Equipment Installation 3. Align one of the inner rails to the mounting position on the management switch. 4. Attach the inner rail to the management switch with the three flat head Philips screws. 5. Repeat previous two steps to attach the inner rail to other side of the management switch.

  • Page 46: Install The Data Switch In The Cabinet

    2U4N Configuration Equipment Installation 8. Login to the switch again , this time the password is Scaleio123 9. Type and click enter. enable 10. Type terminal (or ) to enter global configuration mode. configure config 11. Type to enter interface configuration mode for the interface management 0 virtual interface which accesses management port 1 on the currently active supervisor.

  • Page 47: Configure The Data Switch

    2U4N Configuration Equipment Installation Configure the data switch This procedure is used to configure the data switch. Procedure 1. Copy the configuration filename from the USB flash drive using the following command: enable 2. Then, copy usb1:<configuration file>startup-config Example: localhost> enable locathot>...
  • Page 48 2U4N Configuration Equipment Installation Note Arista switches are by default set to Use Jumbo Frames; no additional configuration is needed on switches for Performance Best Practice. 16. Repeat this procedure if required to configure additional data switches. VxRack Node Hardware Installation Guide...

  • Page 49: Wiring Diagrams For A 2U1N Configuration

    CHAPTER 4 Wiring Diagrams for a 2U1N Configuration This chapter provides the power, management, and data wiring diagrams for the 2U1N configuration. Topics included: Guidelines for wiring a 2U1N configuration............50 Single-phase wiring for 2U1N configuration ............51 Three-phase delta wiring for 2U1N configuration ..........

  • Page 50: Guidelines For Wiring A 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Guidelines for wiring a 2U1N configuration Use the following illustration as reference for connectors on rear of the servers: Figure 22 Connectors on rear of servers Use the wiring diagrams to connect power, management, and data cables. As cables are installed and connected, dress and tie cables frequently so that excess slack does not interfere with routing of adjacent cables.

  • Page 51: Single-Phase Wiring For 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Single-phase wiring for 2U1N configuration Use Figure 25 to connect power cables in cabinets with single-phase power distribution. Single-phase wiring for 2U1N configuration...

  • Page 52: Single-Phase Power Distribution

    Wiring Diagrams for a 2U1N Configuration Figure 23 Single-phase power distribution VxRack Node Hardware Installation Guide...

  • Page 53: Three-Phase Delta Wiring For 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Three-phase delta wiring for 2U1N configuration Use Figure 26 to connect power cables in cabinets with three-phase delta power distribution. Three-phase delta wiring for 2U1N configuration...

  • Page 54: Three-Phase Delta Power Distribution

    Wiring Diagrams for a 2U1N Configuration Figure 24 Three-phase delta power distribution VxRack Node Hardware Installation Guide...

  • Page 55: Three-Phase Wye Wiring For 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Three-phase wye wiring for 2U1N configuration Use Figure 27 to connect power cables in cabinets with three-phase wye power distribution. Three-phase wye wiring for 2U1N configuration...

  • Page 56: Three-Phase Wye Power Distribution

    Wiring Diagrams for a 2U1N Configuration Figure 25 Three-phase wye power distribution VxRack Node Hardware Installation Guide...

  • Page 57: Management Network Wiring For 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Management network wiring for 2U1N configuration Use Figure 28 and Table 9 to connect the management network cables. Note Space on the page with Figure 28 does not provide enough space to illustrate cabling of the maximum number of nodes in the management network.

  • Page 58: Management Network

    Wiring Diagrams for a 2U1N Configuration Figure 26 Management network VxRack Node Hardware Installation Guide...

  • Page 59: Management Network Cabling

    Wiring Diagrams for a 2U1N Configuration Table 9 Management network cabling Management Switch Arista 7010 Source Destination Node1 BMC Management Switch Port 2 Node1 NIC1 Management Switch Port 4 Node2 BMC Management Switch Port 6 Node2 NIC1 Management Switch Port 8 Node3 BMC Management Switch Port 10 Node3 NIC1...

  • Page 60: Data Network A Wiring For 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Table 9 Management network cabling (continued) Management Switch Arista 7010 Source Destination Node17 BMC Management Switch Port 29 Node17 NIC1 Management Switch Port 31 Data Network Switch A Mgmt Port Management Switch Port 47 Data Network Switch B Mgmt Port Management Switch Port 48 Management Server NIC1...

  • Page 61: Data Network A

    Wiring Diagrams for a 2U1N Configuration Figure 27 Data network A Data network A wiring for 2U1N configuration...

  • Page 62: Data Network A Cabling

    Wiring Diagrams for a 2U1N Configuration Table 10 Data network A cabling Data Switch A Source Destination Node 1 Onboard Port 0 Data Network Switch A Port 2 Node 1 Mezzanine Port 0 Data Network Switch B Port 4 Node 2 Onboard Port 0 Data Network Switch A Port 6 Node 2 Mezzanine Port 0 Data Network Switch B Port 8...

  • Page 63: Data Network B Wiring For 2U1N Configuration

    Wiring Diagrams for a 2U1N Configuration Table 10 Data network A cabling (continued) Data Switch A Node 16 Mezzanine Port 0 Data Network Switch B Port 27 Node 17 Onboard Port 0 Data Network Switch A Port 29 Node 17 Mezzanine Port 0 Data Network Switch B Port 31 Data network B wiring for 2U1N configuration Use Figure 30 and Table 11 to connect the data network B cables.

  • Page 64: Data Network B

    Wiring Diagrams for a 2U1N Configuration Figure 28 Data network B VxRack Node Hardware Installation Guide...

  • Page 65: Data Network B Cabling

    Wiring Diagrams for a 2U1N Configuration Table 11 Data network B cabling Data Switch B Source Destination Node 1 Onboard Port 1 Data Network Switch B Port 2 Node 1 Mezzanine Port 1 Data Network Switch A Port 4 Node 2 Onboard Port 1 Data Network Switch B Port 6 Node 2 Mezzanine Port 1 Data Network Switch A Port 8...
  • Page 66 Wiring Diagrams for a 2U1N Configuration Table 11 Data network B cabling (continued) Data Switch B Node 16 Mezzanine Port 1 Data Network Switch A Port 27 Node 17 Onboard Port 1 Data Network Switch B Port 29 Node 17 Mezzanine Port 1 Data Network Switch A Port 31 VxRack Node Hardware Installation Guide...

  • Page 67: Wiring Diagrams For A 2U4N Configuration In A Cabinet With Single-Phase Power Distribution

    CHAPTER 5 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution This chapter provides the power, management, and data wiring diagrams for 2U4N configuration installed in a cabinet with single-phase power distribution. Topics included: Guidelines for wiring a 2U4N configuration in a single-phase cabinet....68 Single-phase wiring for 2U4N configuration ............69...

  • Page 68: Guidelines For Wiring A 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Guidelines for wiring a 2U4N configuration in a single-phase cabinet Use the following illustration as reference for connectors on rear of the servers: Figure 29 Connectors on rear of servers Use the wiring diagrams to connect power, management, and data cables.

  • Page 69: Single-Phase Wiring For 2U4N Configuration

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Power Single-phase wiring for 2U4N configuration on page 69 Management A networkManagement network A wiring for 2U4N configuration in a single-phase cabinet on page 71 Data network: Data network A nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a single- phase cabinet on page 76...

  • Page 70: Single-Phase Power Distribution

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 30 Single-phase power distribution VxRack Node Hardware Installation Guide...

  • Page 71: Management Network A Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Management network A wiring for 2U4N configuration in a single-phase cabinet Use Figure 33 and the table that follows to connect the management network A cables. Note Space on the page with Figure 33 does not provide enough space to illustrate cabling of the maximum number of nodes in management network A.

  • Page 72: Management Network A

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 31 Management network A VxRack Node Hardware Installation Guide...
  • Page 73 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Management network A wiring for 2U4N configuration in a single-phase cabinet...

  • Page 74: Management Network B Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Management network B wiring for 2U4N configuration in a single-phase cabinet Use Figure 34 and the table that follows to connect the management network B cables. VxRack Node Hardware Installation Guide...

  • Page 75: Management Network B

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 32 Management network B Management network B wiring for 2U4N configuration in a single-phase cabinet...

  • Page 76: Data Network A Nodes 1 - 3 And 9 - 11 Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data network A nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a single-phase cabinet Use Figure 35 and table that follows to connect the data network A cables for nodes 1 - 3 and 9 - 11.
  • Page 77 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 33 Data network A nodes 1-3 and 9-11 Data network A nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a single-phase cabinet...
  • Page 78 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution VxRack Node Hardware Installation Guide...

  • Page 79: Data Network A Nodes 4 - 8 Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data network A nodes 4 - 8 wiring for 2U4N configuration in a single-phase cabinet Use Figure 36 and the table that follows to connect the data network A for nodes 4 - Note Space on the page with Figure 36 does not provide enough space to illustrate cabling of the maximum number of nodes in data network A, nodes 4 - 8.
  • Page 80 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 34 Data network A, nodes 4 - 8 VxRack Node Hardware Installation Guide...
  • Page 81 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data Switch A Source Destination Node4 MB1 Mezz0 Port0 Data Network Switch A Port 95 Node4 MB1 Mezz1 Port1 Data Network Switch A Port 93 Node4 MB2 Mezz0 Port0 Data Network Switch A Port 91 Node4 MB2 Mezz1 Port1 Data Network Switch A Port 89...

  • Page 82: Data Network B Nodes 1 - 3 And 9 - 11 Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data Switch A Source Destination Node8 MB1 Mezz1 Port1 Data Network Switch A Port 38 Node8 MB2 Mezz0 Port0 Data Network Switch A Port 36 Node8 MB2 Mezz1 Port1 Data Network Switch A Port 34 Node8 MB3 Mezz0 Port0 Data Network Switch A Port 10...

  • Page 83: Data Network B, Nodes 1 - 3 And 9 - 11

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 35 Data network B, nodes 1 - 3 and 9 - 11 Data network B nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a single-phase cabinet...
  • Page 84 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution VxRack Node Hardware Installation Guide...

  • Page 85: Data Network B Nodes 4 - 8 Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data network B nodes 4 - 8 wiring for 2U4N configuration in a single-phase cabinet Use Figure 38 and table that follows to connect the data network B for nodes 4 - 8. Note Space on the page with Figure 38 does not provide enough space to illustrate cabling of the maximum number of nodes in data network B, nodes 4 - 8.
  • Page 86 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 36 Data network B, nodes 4 - 8 VxRack Node Hardware Installation Guide...

  • Page 87: Data Network C Nodes 12 - 14 Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data network C nodes 12 - 14 wiring for 2U4N configuration in a single-phase cabinet Use Figure 39 and the table that follows to connect the data network C for nodes 12 - Data network C nodes 12 - 14 wiring for 2U4N configuration in a single-phase cabinet...
  • Page 88 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 37 Data network C nodes 12 - 14 VxRack Node Hardware Installation Guide...

  • Page 89: Data Network D Nodes 12 - 14 Wiring For 2U4N Configuration In A Single-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data network D nodes 12 - 14 wiring for 2U4N configuration in a single-phase cabinet Use Figure 40 and the table that follows to connect the data network D for nodes 12 - Data network D nodes 12 - 14 wiring for 2U4N configuration in a single-phase cabinet...
  • Page 90 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Figure 38 Data network D nodes 12 - 14 VxRack Node Hardware Installation Guide...
  • Page 91 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution Data network D nodes 12 - 14 wiring for 2U4N configuration in a single-phase cabinet...
  • Page 92 Wiring Diagrams for a 2U4N Configuration in a Cabinet with Single-Phase Power Distribution VxRack Node Hardware Installation Guide...

  • Page 93: Wiring Diagrams For A 2U4N Configuration In A Cabinet With 3-Phase Delta Or 3-Phase Wye Power Distribution

    CHAPTER 6 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution This chapter provides the power, management, and data wiring diagrams for 2U4N configuration installed in a cabinet with 3-phase delta or 3-phase wye power distribution.

  • Page 94: Guidelines For Wiring A 2U4N Configuration In A 3-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Guidelines for wiring a 2U4N configuration in a 3-phase cabinet Use the following illustration as reference for connectors on rear of the servers: Figure 39 Connectors on rear of servers Use the wiring diagrams to connect power, management, and data cables.

  • Page 95: Three-Phase Delta Wiring For 2U4N Configuration

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Power(as applicable to power distribution in the cabinet): Three-phase delta wiring for 2U4N configuration on page 95 Three-phase wye wiring for 2U4N configuration on page 97 Management A network Management network A wiring for 2U4N configuration in...

  • Page 96: Three-Phase Delta Power Distribution

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 40 Three-phase delta power distribution VxRack Node Hardware Installation Guide...

  • Page 97: Three-Phase Wye Wiring For 2U4N Configuration

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Three-phase wye wiring for 2U4N configuration Use Figure 43 to connect power cables in cabinets with three-phase wye power distribution. Three-phase wye wiring for 2U4N configuration...

  • Page 98: Three-Phase Wye Power Distribution

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 41 Three-phase wye power distribution VxRack Node Hardware Installation Guide...

  • Page 99: Management Network A Wiring For 2U4N Configuration In A 3-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Management network A wiring for 2U4N configuration in a 3-phase cabinet Use Figure 44 and table that follows to connect the management network A cables. Note Space on the page with Figure 44 does not provide enough space to illustrate cabling of the maximum number of nodes in management network A.

  • Page 100: Management Network A

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 42 Management network A VxRack Node Hardware Installation Guide...
  • Page 101 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Management network A wiring for 2U4N configuration in a 3-phase cabinet...

  • Page 102: Data Network A Nodes 1 - 3 And 9 - 11 Wiring For 2U4N Configuration In A 3-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Data network A nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a 3-phase cabinet Use Figure 45 and table that follows to connect the data network A cables for nodes 1 - 3 and 9 - 11.
  • Page 103 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 43 Data network A nodes 1 - 3 and 9 - 11 Data network A nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a 3-phase cabinet...
  • Page 104 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution VxRack Node Hardware Installation Guide...

  • Page 105: Data Network A Nodes 4 - 8 Wiring For 2U4N Configuration In A 3-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Data network A nodes 4 - 8 wiring for 2U4N configuration in a 3-phase cabinet Use Figure 46 and the table that follows to connect the data network A for nodes 4 - Note Space on the page with Figure 46 does not provide enough space to illustrate cabling of the maximum number of nodes in data network A, nodes 4 - 8.
  • Page 106 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 44 Data network A nodes 4 - 8 VxRack Node Hardware Installation Guide...
  • Page 107 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Data Switch A Source Destination Node4 MB1 Mezz0 Port0 Data Network Switch A Port 95 Node4 MB1 Mezz1 Port1 Data Network Switch A Port 93 Node4 MB2 Mezz0 Port0 Data Network Switch A Port 91 Node4 MB2 Mezz1 Port1...

  • Page 108: Data Network B Nodes 1 - 3 And 9 - 11 Wiring For 2U4N Configuration In A 3-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Data Switch A Source Destination Node8 MB1 Mezz1 Port1 Data Network Switch A Port 38 Node8 MB2 Mezz0 Port0 Data Network Switch A Port 36 Node8 MB2 Mezz1 Port1 Data Network Switch A Port 34 Node8 MB3 Mezz0 Port0...

  • Page 109: Data Network B Nodes 1 - 3 And 9 - 11

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 45 Data network B nodes 1 - 3 and 9 - 11 Data network B nodes 1 - 3 and 9 - 11 wiring for 2U4N configuration in a 3-phase cabinet...
  • Page 110 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution VxRack Node Hardware Installation Guide...

  • Page 111: Data Network B Nodes 4 - 8 Wiring For 2U4N Configuration In A 3-Phase Cabinet

    Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Data network B nodes 4 - 8 wiring for 2U4N configuration in a 3-phase cabinet Use Figure 48 and table that follows to connect the data network B for nodes 4 - 8. Note Space on the page with Figure 48 does not provide enough space to illustrate cabling of the maximum number of nodes in data network B, nodes 4 - 8.
  • Page 112 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Figure 46 Data network B nodes 4 - 8 VxRack Node Hardware Installation Guide...
  • Page 113 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution Data network B nodes 4 - 8 wiring for 2U4N configuration in a 3-phase cabinet...
  • Page 114 Wiring Diagrams for a 2U4N Configuration in a Cabinet with 3-Phase Delta or 3-Phase Wye Power Distribution VxRack Node Hardware Installation Guide...

  • Page 115: Update The Install Database

    CHAPTER 7 Update the Install Database This chapter provides information to update the install database after all work is completed. The chapter contains the following topic: Update the install database................116 Update the Install Database...

  • Page 116: Update The Install Database

    After all work is complete, use this procedure to update the install database. Procedure 1. Open a web browser and navigate to the Dell EMC Business Services website at http://emc.force.com/BusinessServices. 2. In the Post Sales area, click Install Base Group.

Table of Contents