Table of Contents
Advertisement
4. TLNET Configurator
The TLNET Configurator utility simplifies configuration and firmware update of multiple TLNETCARDs as described in the following sections.
Configuration of individual TLNETCARDs using the TLNET Configurator is covered in Section 2.1.1.
4.1 Batch Configuration
This function of the utility allows the configuration of one (source) TLNETCARD to be copied to one or more (target) TLNETCARDs.
Step 1: Within the TLNET Supervisor of the source TLNETCARD, go to System g Administration g Batch Configuration and select the
Download button in either the System Configuration or the SNMP Configuration window. The contents of the configuration file will appear in a
web page.
Step 2: Select and copy the entire contents of the configuration file.
Step 3: Open a text editor application such as Notepad and paste the contents. Save the file to a location where it can be accessed by the
TLNET Supervisor or Configurator (e.g. on the computer's desktop).
Step 4: If required, make edits to the configuration file, then save it with a .ini extension (e.g. snmp.ini).
Note: The configuration file name cannot contain spaces, hyphens or special characters.
Caution: The Network settings, including IP Address, Mask and Gateway of the source TLNETCARD will be transferred to the target
TLNETCARDS. To prevent a setting from being transferred to other devices, simply "comment out" its line item by placing a semicolon
(;) at the beginning of the line item. In the example below, the IP Address will NOT be transferred but the remaining items will.
Launch the TLNET Configurator and set the required network paramters (LAN, Subnet), then click Discover.
27
Advertisement
Table of Contents
