Preparation Of The Parking Space - Bosch PLS User Manual

Parking Lot Sensor | PLS
INFORMATION:
For the bonding procedure, please follow the instructions of the adhesive manufacturer (e.g.,
temperature, safety information and work instructions).
A prior cleaning of the relevant place of installation (parking slot) should be clarified in advance with
the operator of the premises so that the treatment does not result in removal of existing coatings.

Preparation of the parking space

The parking space must be free of dirt, dust, oil, water and other contaminants.
It is recommended to clean the surface to remove contamination using a high-pressure cleaner and a burner. The PLS
must be installed in the center of the parking space (intersection of the two diagonals, see Fig. 3) in order to ensure
optimum sensor accuracy.
Figure 3 Determination of the center of the parking space
Figure 4 Available parking space for sensor installation
© Robert Bosch France SAS 2022. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the
event of application for industrial property rights. Data subject to change without notice. Printed in France, December 2022.
5 | 18