Master Mode - Philips EasyKey 7000 Series User Manual

Master mode

Master PIN code
After lighting up the keypad, press [*] twice
before entering other numbers, then enter
the master PIN code and confirm with [#],
then you are in master mode.
Attention
If the master PIN code is the initial PIN code, you
will need to enter [1] and then [5] in the master
mode to modify the master PIN code before you
can perform other operations.
Master fingerprint
After lighting up the keypad, press [*] twice
before entering other numbers, then place
your enrolled master fingerprint on the
fingerprint sensor to enter master mode.
Attention
1. Please enroll a master fingerprint before using
the product.
2. Please do not set the master fingerprint and user
fingerprint with the same finger.
10
User settings
Add a user PIN code
Press [*] twice, enter the master PIN code,
and then press [#] to confirm.
1 1
Press [1] to enter user settings, and then
press [1] to add a user, the door lock will
automatically recognize the corresponding
access method and add PIN codes,
fingerprints, and key tags directly.
Add a user PIN code: Enter a new user
PIN code, and press 【#】 to confirm, then
re-enter the user PIN code and confirm
with 【#】 again. After the voice prompt
of "succeeded", press [*] to back to the
previous menu until exit the master mode.
Add a user fingerprint: Place the finger on
the fingerprint sensor, and you will hear a
voice prompt of "please remove your finger
and place it on the sensor again", take your
finger off and put it back again, repeat
several times until you hear a voice prompt
of "succeeded", then press
the previous menu until you exit the master
mode.
Add a user key tag: Enroll a new key
tag, when you hear a voice prompt of
"succeeded", press
【*】
previous menu until you exit the master
mode.
to return to
【*】
to back to the