Makita UB100D Instruction Manual page 7

Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. When not using the battery cartridge, remove
it from the tool or the charger.
ASSEMBLY
CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before carrying out any work on the machine.
Assembly for blowing
Installing or removing the nozzle
Optional accessory for UB101D
Align the protrusions on the nozzle with the grooves on
the main unit, then insert the nozzle into the main unit,
and then turn it to lock it into place.
1
► 1. Nozzle
To remove the nozzle, perform the installation proce-
dure in reverse.
Installing or removing the garden
nozzle
Optional accessory for UB100D
Align the protrusions on the garden nozzle with the
grooves on the main unit, then insert the garden nozzle
into the main unit, and then turn it to lock it into place.
1
► 1. Garden nozzle
To remove the garden nozzle, perform the installation
procedure in reverse.
Installing or removing the brush and
wiper nozzle
Optional accessory for UB100D / UB101D
Attach the brush nozzle or wiper nozzle to the flexible
hose, and then install the flexible horse to the main unit.
1
2
► 1. Brush nozzle 2. Wiper nozzle 3. Flexible hose
To remove the brush nozzle or wiper nozzle, perform
the installation procedure in reverse.
7 ENGLISH
3