Keep children and bystanders away while The vibration total value (tri-axial vector sum) deter- operating a power tool. Distractions can cause mined according to EN62841-1: you to lose control. Model UB100D Electrical safety Work mode: operation without load Vibration emission (a ) : 2.5 m/s or less Power tool plugs must match the outlet.
Page 4
Use personal protective equipment. Always Disconnect the plug from the power source wear eye protection. Protective equipment such and/or remove the battery pack, if detachable, from the power tool before making any adjust- as a dust mask, non-skid safety shoes, hard hat or ments, changing accessories, or storing power hearing protection used for appropriate conditions will reduce personal injuries.
Page 5
If the machine is damaged, ask Makita Authorized Service Centers for repair. It is an employer's responsibility to enforce the use of appropriate safety protective equip- 16.
Page 6
If the parts are worn or damaged, replace them rain. Water entering the tool will increase the risk with parts provided by Makita. of electric shock. Store the machine in a dry place out of the Service reach of children.
Page 7
Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. 7 ENGLISH...
Page 8
Optional accessory for UB100D Optional accessory for UB100D / UB101D Align the protrusions on the garden nozzle with the Install the long nozzle in the same way as the nozzle. To grooves on the main unit, then insert the garden nozzle remove the long nozzle, perform the installation proce- into the main unit, and then turn it to lock it into place.
Installing or removing the dust bag FUNCTIONAL Optional accessory for UB100D / UB101D DESCRIPTION Align the protrusions on the joint of dust bag with the grooves on the main unit, then insert the joint into the main unit, and then turn it to lock it into place.
Battery protection system Switch action The machine is equipped with a battery protection WARNING: Before installing the battery car- system. This system automatically cuts off power to the tridge into the machine, always check to see that motor to extend battery life. the switch trigger actuates properly and returns The machine will automatically stop during operation if to the "OFF"...
CAUTION: Always switch off the machine area. before opening or fastening the fastener of the For UB100D dust bag. NOTICE: When performing the vacuuming oper- ation, do not use the garden nozzle. The materials sucked may be clogged, and cause a malfunction of the machine.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 12 ENGLISH...
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man- ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.