Auto Set Up - JVC G-code ShowView HR-S5900AM Instructions Manual

8
EN

Auto Set Up

IM PO RTAN T
● Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
● If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
– To change the selected language
– To reset or adjust the time
– To add/delete channels manually
– To reset the tuner after moving to a different location
pg. 54
M EN U
pg. 11
pg. 12
pg. 55, 56
O K
PU SH JO G
IN ITIAL SETTIN GS (cont.)
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear.
Before starting, make sure of the following:
● The TV aerial cable should be connected to the recorder.
● The recorder's mains power cord should be connected to
a mains outlet. pg. 4, 5
● The "Video Channel Set" procedure should be done first
and the TV should be set to its AV mode (with AV or S-
VIDEO connection
connection pg. 6).
SELECT LAN GUAGE
1
Press %fi to place the pointer next to your
PU SH JO G
desired language (English or Chinese), then press
.
PU SH JO G
#
● The Clock Set screen appears.
SET TIME
2
Press %fi to
PU SH JO G
set the time, then press
or # .
PU SH JO G
● Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
3
Press %fi to set the date, then press
PU SH JO G
# .
PU SH JO G
● Press and hold either button to change the date by 15
days.
SET YEAR
4
Press %fi to set the year, then press
PU SH JO G
pg. 7) or video channel (with RF
CLOCK SET
O K
TIME DATE
0:00 01. 01
[5/ ∞ ] =
[MENU] : EXIT
or
O K
YEAR
01
or
O K
.
M EN U