Identifying The Mounting Position - HP A5820X Series Installation Manual

Table 6 Rack-mounting procedures at a glance
Chassis
A5800-48G-PoE+ (2 slots)
A5800-48G-PoE+ TAA (2 slots)
A5820X- 1 4XG-SFP+ (2 slots)
A5820X- 1 4XG-SFP+ TAA (2 slots)
A5800AF-48G
A5820AF-24XG
All other A5800 switches
A5820X-24XG-SFP+
A5820X-24XG-SFP+ TAA
Figure 5 Rack-mounting procedure (I)
Figure 6 Rack-mounting procedure (II)
Figure 7 Rack-mounting procedure (III)
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with mounting brackets.

Identifying the mounting position

Table 7 describes the mounting positions for the A5800AF-48G and A5820AF-24XG switches and
8 describes the mounting positions for all the other switches in this series.
Procedure
Procedure references
diagram
1. Identifying the mounting position
2. Attaching the mounting brackets to the chassis (for
all the
Figure 5
48G/A5820AF-24XG)
3. Rack-mounting an A5800/A5820X switch except
the A5800AF-48G/A5820AF-24XG
4. Identifying the mounting position
5. Attaching the mounting brackets, chassis rails, and
grounding cable (A5800AF-48G/A5820AF-24XG)
Figure 6
6. Rack-mounting an A5800AF-48G/A5820AF-24XG
switch
7. Identifying the mounting position
8. Attaching the mounting brackets to the chassis (for
all the
Figure 7
48G/A5820AF-24XG)
9. Rack-mounting an A5800/A5820X switch except
the A5800AF-48G/A5820AF-24XG
8
switches except the
switches except the
A5800AF-
A5800AF-
Table