Remote Connection - Smeg SBC4604WNR Manual

Connection menu).
Make sure that you activate the
Remote Control in order to control the
device via the App.
Automatic mode (WPS)
Make sure that the WPS option is
activated on your router.
Make sure that the mobile device and
the product connect to the same Wi-Fi
network during the procedure.
1. Select Automatic mode (WPS) on the
device.
2. Select Automatic mode (WPS).
3. Within two minutes, press the WPS button
on your router.
4. Touch the Confirm
5. Wait for the welcome page.
During this step, the mobile device
automatically reconnects to the initial
Wi-Fi network or data network. No user
operation is required.
The "REGISTRATION COMPLETED!" displays
on the device.
The Connectivity
area at the top right) remains on solid. The
product registration procedure has been
completed.
Now the display of the appliance shows
the
Settings menu to activate the
Remote control (on some models only: within
91477A874/A
button.
icon (in the information
the Connection
Make sure that you activate the
Remote Control in order to control the
device via the App.

Remote connection

Once the device is registered, it can be
connected or disconnected from the
Internet at any time.
The remote connection is only available
if the device has been registered.
The remote connection is already active
when the registration procedure has
been completed. Remote Control on
the other hand is not enabled.
To connect the appliance:
1. Touch the Settings
bottom right) on the main menu display on
the appliance.
2. Select Connectivity (on some models
only: in the Connection
3. Select On.
4. Touch the Confirm
the Connectivity.
To control the appliance through App:
5. Select Remote control (on some
models only: in the Connection
6. Select On.
Remote control is only available if the
Connectivity is set to On.
.
menu).
button (at the
menu).
button to enable
menu).
USE - 15