Table of Contents
Advertisement
Out of the Box
Make sure that your shipping box contains these items:
•
•
•
•
If any of these items are missing or appear damaged, contact your Customer
Account Representative. Keep the original packaging in the event that you need to
return the dock for service or if you want to store the dock while not in use.
Dock Connectors
Connect Power
Use only a UL Listed power supply that has been qualified by Honeywell with an
output rated at 12 VDC and 3 A. The power supply input rating is 100-240 VAC, 50/
60 Hz. The operating temperature is -10 °C to 50 °C (14 °F to 122 °F). The
maximum output of the base is 5VDC/2A.
1. Plug the power cord into the power supply.
2. Plug the power supply cable into the power jack on the back of the dock.
3. Plug the power cord into a standard wall outlet.
Connect to Monitor
Note: See
1. Plug the HDMI cable into the dock.
2. Plug the other end of the HDMI cable into the monitor.
Connect to an Ethernet Network
1. Plug the Ethernet cable into the dock.
2. Place the computer in the dock.
Note: For advanced Ethernet settings, go to
Guide.
30
CT40 Universal Display Dock (CT40-DB-UVN or CT40-DB-UVB)
Power adapter
Power cord
Regulatory Sheet
Monitor Connections
on page 34 for a list of approved connections.
sps.honeywell.com
CT4x Series Accessories User Guide
for the Dolphin CT40 User
Advertisement
Table of Contents
