Mount The Charge Base Or Net Base - Honeywell CT4 Series User Manual

Mount the Charge Base or Net Base

You can mount the charger on a flat, horizontal surface such as a desktop or
workbench with an optional DIN rail.
Mounting hardware required:
•
•
•
•
1. Slide the DIN rail into the slot on the bottom of the
2. Secure the DIN rail to the flat surface with the hardware.
22
DIN rail
3/16-inch diameter x 5/8-inch long pan head screw
1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
3/16-inch diameter nut
Charge Base or Net Base.
CT4x Series Accessories User Guide