Yamaha NAVIGO Owner's Manual page 98

Case of Battery Bag Band Tip Part not Reaching to Battery
Bag
(9) Attach the fitting tape aligned to the band part tip of bat-
tery bag.
(10) After feeding the band part of battery bag through the
frame, attach the fitting tape of band edge part to the
band.
Case of Battery Bag Band Tip Part Reaching to Battery Bag
(11) Attach the fitting tape aligned to the edge part of hook-
and-loop fastener (female) at the base of battery bag
band part.
11
(12) After feeding the band part of battery bag through the
frame, attach the fitting tape of band edge part to the
band.
Remove the hook-and-loop fastener (female) attached
to the battery bag once, and attach the surplus band
part tip to the hook-and-loop fastener (male) of battery
bag.
After attached the band, attach the hook-and-loop
fastener (female) to the original position.
● Attach entire surface of fitting tape to the band part of battery bag. Otherwise, there may be
the risk of battery bag coming off.
● Make sure the band part of the battery bag is taut. A slack or loose band could allow the
battery bag to come off or the band could get caught in moving parts.
92
Fitting Tape
Band Part of
Battery Bag
Band Part of
Battery Bag
Hook-and-Loop Fastener
(male) of Battery Bag
NOTICE
Frame
Band Part of
Battery Bag
Frame
Fitting Tape
Band Part of
Battery Bag
Band Part Tip
Frame
Fitting Tape
Fitting Tape
Frame
Battery Bag
Hook-and-Loop
Fastener (female)
Battery Bag
Battery Bag
Battery Bag
Band Part Tip