Solving Problems; Checking The Rx600 Screen - Epson Stylus Photo RX600 User Manual

Solving Problems

If you have a problem with your Stylus Photo RX600, check the messages on the
RX600 screen, run a nozzle check (see page 142), or see "Problems and Solutions"
on page 142.
See these sections:
"Checking the RX600 Screen" below
"Printing a Nozzle Check" on page 142
"Problems and Solutions" on page 142
"Uninstalling Your Software" on page 153
"Where To Get Help" on page 157

Checking the RX600 Screen

Here is a list of error messages that appear on the RX600 screen and what you
should do when you see them.
Error Message
Printer error occurred. Please see the
documentation.
Scanner error occurred. Please see the
documentation.
Bluetooth module error. Please replace
the adapter.
Bluetooth communication error.
Solution
Turn your Stylus Photo RX600 off, and
then back on. If the error message still
appears, contact your dealer.
Turn your Stylus Photo RX600 off, and
then back on. Then make sure the
transportation lock is released. If the
error message still appears, contact your
dealer.
Disconnect the adapter, then reconnect
it to your Stylus Photo RX600.
Resend the print job. If the error occurs
again, confirm the settings on the device
sending the data.
139