Table of Contents
Advertisement
Making changes to PostScript printer settings
You can change the PostScript printer settings in the PostScript
printer driver. Online help is available to help you with the printer
driver settings.
Using online help
If you want help on a particular item, click the "?" icon on the
top-right corner of the dialog box's title bar, then click the name
of the setting that you want more information on. An explanation
of the setting and its options will be displayed.
Notice for Windows Me or 98 Users
The printer may not print normally if the computer is connected
to the printer via the parallel interface and the ECP mode is set. If
this is the case, disable bi-directional support in the printer driver.
To do so, display the printer's Properties dialog box, click the
Details tab, then click Spool Settings. In the Spool Settings dialog
box that appears, Select Disable bi-directional support for this
printer, then click OK.
Using the Reserve Job function
The Reserve Job function allows you to store print jobs on the
printer's Hard Disk Drive and to print them later directly from
the printer's control panel.
See "Using the Reserve Job Function" on page 96 for details.
Note:
❏ You need an optional Hard Disk Drive installed in your printer in
order to use the Reserve Job function. Make sure that the drive is
correctly recognized by the printer driver before you start using the
Reserve Job function.
Using the PostScript Printer Driver
6
6
6
6
6
N e w : i n c l u d i n g t h e i n f o r m a t i o n a b o u t W i n d o w s 9 5
6
6
6
6
N e w : U s i n g H D D i s a v a i l a b l e .
6
6
6
203
Advertisement
Table of Contents
