Epson AcuLaser M7000 Series
User's Guide
3. Press the d Down button several times until Reset to display.
4. Press the r Right button. Printing is canceled. The printer is ready to receive a new print job.
Interrupting Printing
If the printer is shared, it is possible to interrupt the current print job to print a different print job.
Follow the steps below to use this function.
1. Press the W Pause/Cancel button to stop the current print job.
2. Press the d Down or u Up button to select the job that you want to print, then press the OK
button.
3. Press the d Down or u Up button to select Interrupt Printing, then press the OK button.
Note:
The operation is canceled and the printing restarts one minute after the printer is not operated.
Using the Control Panel
97