Pioneer CP-EU8 Operating Instructions

Thank you for buying this Pioneer product. This speaker stand should only be
used with the S-EU8BS-LR Pioneer speaker system. Please read through these
operating instructions for proper assembly and use. After you have finished
reading the instructions, put them away in a safe place for future reference.
BEFORE YOU START
Before setting up your speaker system, we recommend reading the operating
CAUTION :
Only use the screws supplied when fixing the speaker to the speaker stand.
Do not place the stand on an unstable and/or sloping surface. The stand and
speaker may fall and cause injury.
ASSEMBLING THE SPEAKER STANDS
Description of goods
Item
1 Base plate
2 Pole
3 Top plate
4 Screw M5 x L50 mm (for pole)
5 Decoupling Spike
6 Base for decoupling Spike
7 Screw M4 x L40 mm (for hangup speakers)
Screw M4 x L50 mm (for hangup speakers)
8
9 Washer
10 Spring Washer
Do not use with any speaker system other than the one for which the unit was
designed. The stand may collapse and be damaged and/or the speaker may fall
and cause injury.
When moving the speaker and stand, first remove the speaker from the stand,
and then move the stand, holding it by the two stems.
IMPORTANT :
Pioneer assumes no liability whatsoever for damages resulting from assembly,
improper mounting, insufficient reinforcement, misuse of the product, acts of
nature, etc.
4
3
2
1
5
6
Speaker Stand
A
7
B
8
Part no.
SBA6010
SBA6008
SBG6001
SBA6011
SBA6012
SBE1036
SBE1035
Operating Instructions
9
10
9
10
Qty
2 pcs
2 pcs
2 pcs
16 pcs
8 pcs
8 pcs
4 pcs
4 pcs
4 pcs
4 pcs