Weather Auto Scan; Setting Weather Auto Scan; Setting Weather Alert Mode; Setting Weather Alert Scan - Cobra 29 LX Owner's Manual

Operation
2 3
CAL
TX
163.275
3 5 7 9
+30dB
WX !
DYNAMIKE RF GAIN DELTA TUNE
N MIN MAX
2 3 AUTO SCN IS OFF
1.5
R CAL
TX
RX ON
OFF
5 7 9
3
1
G +30dB
MEM
DYNAMIKE RF GAIN DELTA TUNE
MIN MIN MAX
2 3
1.5 WX ALERT IS OFF
R CAL
TX
RX ON
OFF
3 5 7 9
1
G +30dB
MEM
DYNAMIKE RF GAIN DELTA TUNE
MIN MIN MAX
3
1.5 2 WX! SCN IS OFF
CAL
R TX
RX ON
OFF
3 5 7 9
1
G +30dB
MEM
DYNAMIKE RF GAIN DELTA TUNE
MIN MIN MAX
16
29LX_MANL_TH_REV_082222.indd 16-17 29LX_MANL_TH_REV_082222.indd 16-17

Weather Auto Scan

CH 9/ If active while in CB or PA mode, will
SCAN
19
MEM SCAN determine if the present WX channel is
active. If the present WX channel is not
ESC
active, will search for the strongest WX
SWR
T BACK
CAL channel and auto change to that channel.
Default is off. Go to Menu mode to choose
on/off (see page 9).
OFF

Setting Weather Auto Scan

CH 9/
SCAN
19
1. Press Menu/Enter knob and rotate
MEM SCAN
clockwise to WX Auto Scan. Press Menu/
ESC
Enter knob to select On/Off.
SWR
T BACK
CAL
2. Press Menu/Enter knob to select On/Off
and exit to main menu.
OFF

Setting Weather Alert Mode

CH 9/
SCAN
19
1. Turns WX Alert On/Off. Default is Off.
MEM SCAN
Press Menu/Enter knob to select Set WX
ESC
Alert. If Weather is On, WX Alert Icon will
SWR
T BACK
CAL
be displayed.
2. Press Menu/Enter knob to select On/Off
and exit to main menu.
OFF

Setting Weather Alert Scan

CH 9/
SCAN
19
1. Press Menu/Enter knob and rotate
MEM SCAN
clockwise to WX Alert Scan. Press Menu/
ESC
Enter knob to select On/Off.
SWR
T BACK
CAL
2. Press Menu/Enter knob to select On/Off
and exit to main menu.
OFF
NOTE: If an alert is detected the unit will
activate WX mode on the channel with the
alert. Use Menu/Enter knob to select On/Off
and press to set.
Operation

Software Version/Factory Settings

Displays current software version and returns unit to original factory settings. To view
software version, rotate Menu/Enter knob clockwise to select Settings then Software Version.
NB/ANL
2 3
NB/ANL 1.5 CAL CONTRAST
SWR
TX
ANL
RX RADIO CHECK
S/ RF
S/RF
RF
SWR SETTINGS
CAL
3 5 7 9
1
SIG +30dB
NB/ANL
SWR/CAL MEM
2 3
NB/ANL 1.5 SOFTWARE VER
SWR CAL
TX
VOL ANL SQ DYNAMIKE
RX GO TO DEFAULT
S/ RF
S/RF
RF
SWR
CAL
5 7 9
3
1
SIG +30dB
SWR/CAL NB/ANL MEM
2 3 SOFTWARE VER
OFF NB/ANL MIN 1.5 CAL
SWR
TX
VOL SQ DYNAMIKE
ANL
RX GO TO DEFAULT
S/ RF
S/RF
RF
SWR
NB/ANL CAL
3 5 7 9
1
SIG +30dB
SWR/CAL MEM
3
1.5 2 RESTORE DEFAULT
NB/ANL CAL
SWR TX
OFF ANL MIN
RX YES
VOL SQ DYNAMIKE
S/ RF
S/RF RF
SWR NO
CAL
3 5 7 9
1
SIG +30dB
SWR/CAL MEM
VOL SQ DYNAMIKE
OFF MIN
NB/ANL
OFF MIN
NB/ANL
ANL
S/RF
S/RF
SWR /CAL
VOL
OFF
1. To restore default settings, Press Menu/
CH 9/
SCAN
19
Enter knob again. Rotate Menu/Enter
MEM SCAN
knob clockwise to select Settings then
ESC
WX !
Go To Default.
CH 9/
SCAN
19
SWR
RF GAIN DELTA TUNE T BACK
CAL
MEM SCAN
ESC
WX !
2. Press Menu/Enter knob to restore default
CH 9/
SCAN
MIN MAX OFF
19
SWR
RF GAIN DELTA TUNE T BACK
settings. Choose NO to maintain present
CAL
MEM SCAN
setting with no change.
ESC
CH 9/
WX !
SCAN
19
MIN MAX OFF
MEM SCAN SWR
RF GAIN DELTA TUNE T BACK
CAL NOTE: Default display color is green.
ESC
WX !
SWR
RF GAIN DELTA TUNE T BACK
MIN MAX OFF
CAL NB-ANL/OFF (Noise Blanker/
Automatic Noise Limiter) Button
MIN MAX OFF
When switched to ANL the Automatic Noise
2 3
1.5
SWR CAL
TX
Limiter is activated. This helps reduce noise
RX
RF
created by the vehicle's electronics.
3 5 7 9
1
SIG +30dB
MEM WX !
When switched to NB/ANL mode the RF
SQ DYNAMIKE RF GAIN
Noise Blanker is also activated, providing
increased noise filtration.
MIN MIN MAX
When switched to OFF mode all noise
filtration will be turned off.
NOTE: The RF noise blanker is very effective
in reducing repetitive noises such as ignition
interference.

RF Gain Control

The RF Gain is used to optimize reception in
strong or weak signal areas.
Rotate the RF Gain knob counterclockwise
to reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.
NOTE: The RF Gain is used to optimize
reception in weak signal areas.
CH 9/
SCAN
19
MEM SCAN
ESC
SWR
DELTA TUNE T BACK
CAL
OFF
17
8/26/22 2:37 PM 8/26/22 2:37 PM