Internal Power Supply; Rear Panel - Cisco Catalyst 9200 Series Hardware Installation Manual

Product Overview
Network Module
C9200-NM-2Q
C9200-NM-BLANK
Note

Internal Power Supply

All the compact switches except C9200CX-12T-2X2G are powered through internal power supplies. The
internal power supply is an autoranging unit that supports input voltages between 100 and 240 VAC (max of
90V to 264V). The AC frequency range of the power supply is 50Hz/60Hz. Plug the AC power cord into the
AC power connector and into an AC power outlet.
Table 4: Available PoE with AC Power Supply
Models
C9200CX-12P-2X2G
C9200CX-8P-2X2G

Rear Panel

The switch rear panel includes StackWise connectors, fan modules, and power supply modules.
Figure 4: Rear Panel of a C9200L Switch
1
Description
This module has two 40G slots with a QSFP+ connector in each slot.
This module is supported only on C9200 Multigigabit Ethernet switches.
Insert this blank module when the switch has no uplink ports to enable
sufficient airflow.
For information about installing a network module, see
RJ-45 console port
Installing a Network Module, on page
Default Power Supply
315W Internal
315W Internal
4
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
Internal Power Supply
Available PoE
240W
240W
Blue Beacon LED
78.
9