Table of Contents
Advertisement
Restoring the manufacturer's
parameters (REINITIALISE)
I
You can restore all of the manufacturer's
settings for all of the functions.
On the menus screen:
press the INFO button to select
"REINITIALISE" (located on menu
2/2) .
press and hold the INFO button for
at least 5 seconds .
An audible signal is heard and all of the
manufacturer's settings are restored for
all of the functions.
36
I N S T R U M E N T S a n d C O N T R O L S
The manufacturer's settings are:
Functions
Reinitialisation
of the average
consumption and
average speed
Fuel consumption
units
Temperature
display unit
Display language
INFO button
sound
Displaying of the
"BREAK ADVISED"
message
LIGHTING RHEOSTAT
System for manual adjustment of the
brightness
Manufacturer's
setting
brightness.
1 (automatic)
L/100 km
°C
With the lights on or off, press the button
to change the intensity of the lighting of
ENGLISH
the instruments and controls in "day" or
"night" mode.
An audible signal is heard and the
ON (activated)
intensity of the lighting increases
each time the button is pressed.
setting, press again to change to the
OFF (deactivated)
minimum setting.
When the lighting reaches the required
intensity, release the button.
The setting is saved when the ignition
switch is turned to OFF.
of
the
instruments
and
Advertisement
Table of Contents
