Table of Contents
Advertisement
P R A C T I C A L I N F O R M A T I O N
Access to the spare wheel in
the 7 seat configuration
The "space-saving" spare wheel is in-
stalled on the outside, under the boot,
supported by a metal carrier.
To gain access to the tools, refer to the
"Access to the tools" paragraph.
Fixing the "space-saving" spare
wheel
wheels, it is normal to notice that the
washers do not come into contact
with the "space-saving" spare wheel
The wheel is retained by the conical
contact of each bolt.
Removing the wheel
Open the tailgate and the lower tail-
gate (refer to the "Access" section).
Take out the handle 3 (refer to the
"Access to the tools" paragraph).
Remove the plastic cover A using
the handle 3 .
Unscrew the spare wheel carrier re-
taining bolt B using the wheel brace
1 .
Close the lower tailgate (refer to the
" Access" section).
Lift the carrier C to detach the hook
D then allow it to lower.
Putting the wheel back in place
Put the wheel back in place in its
carrier.
Lift the carrier C and reposition the
hook D .
Open the lower tailgate (refer to the
"Access" section).
Tighten the spare wheel carrier
retaining bolt B fully using the
wheelbrace 1 .
lower tailgate and store the tools.
IX
A , close the
125
Advertisement
Table of Contents
