Installing A Memory Card; Installing A Memory Card In The Gr2000-1B, Gr2000-2B, Or Gr2000-2B; Figure 4-23 Installation Of A Memory Card; Figure 4-24 After Installation Of A Memory Card - Hitachi GR2000-B Series Installation Manual

Hitachi Gigabit Router GR2000-B Series Installation Guide
4.6

Installing a Memory Card

This section shows how to insert and remove memory cards. The example refers to
memory card 0, but the same procedure applies to memory card 1, which is just to
the left of memory card 0.
4.6.1

Installing a Memory Card in the GR2000-1B, GR2000-2B, or GR2000-2B+

(1) Inserting a Memory Card
Step 1. Insert a memory card in the position shown below in Figure 4-23.
Memory Card
(Part number
should be face up)

Figure 4-23 Installation of a Memory Card

Note: When inserting a memory card, the side labeled with part number
*
"HN-F9531-MC64X" or "HN-F9531-MC256X"should be face up.
Step 2. The lever is pushed out in your direction.
Lever
Memory Card

Figure 4-24 After Installation of a Memory Card

4-18
Memory Card
Slot
GR2K-GA-0007
Rev. 5.00