WLAN security mode
•
security mode that is used in the WLAN access point.
If you select WEP (wired equivalent privacy), 802.1x,
or WPA/WPA2 (Wi-Fi protected access), you must
also configure the relevant additional settings. See
the device help for more information.
WLAN security settings
•
settings for the selected security mode.
Homepage
•
you want to display as the home page when you use
this access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select
Menu
Advanced access point
settings for WLAN
Select
Menu
Tools
>
Access
points.
After setting up a basic access point for WLAN, select
Options
Advanced
>
advanced settings:
IPv4 settings
— Enter the device IP and name server
•
addresses for the IPv4 internet protocol.
IPv6 settings
— Select or enter the name server
•
addresses for the IPv6 internet protocol.
Ad-hoc channel
•
automatically. To enter the channel number (1-11)
manually, select
Proxy server address
•
address.
98
— You must select the same
— Edit the security
— Enter the web address of the page
Connectivity
WLAN
>
>
Settings
Connection
>
>
settings, and define the following
— The channel is usually chosen
User
defined.
— Enter the proxy server
Proxy port number
•
number.
Modem
Select
Menu
Together with a compatible computer, you can use your
device as a modem to connect to the web, for example.
Before you can use your device as a modem
• You need an appropriate data communications
software on your computer, such as Nokia PC Suite. For
wiz..
more information, see the Nokia PC Suite guide.
• You must subscribe to the appropriate network services
from your service provider or internet service provider.
• You must have the appropriate drivers installed on your
computer. You must install drivers for the cable
connection, and you may need to install or update
>
Bluetooth or infrared drivers.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared ports
of the device and computer are directly facing each other
with no obstacles between them.
To connect your device to a computer using Bluetooth
wireless technology, initiate the connection from the
computer. To activate Bluetooth in your device, select
Menu
Connectivity
>
Bluetooth
If you use a cable to connect your device to a computer,
initiate the connection from the computer.
— Enter the proxy server port
Connectivity
> Modem.
>
Bluetooth
>
> On.
and select