Advertisement
"Default device" in "Sound recording":
•
Yamaha PJP Cascade
6
Click the [Voice] tab.
7
Change the settings and click [Apply].
"Default device" in "Voice playback":
•
Yamaha PJP Cascade
"Default device" in "Voice recording":
•
Yamaha PJP Cascade
8
Click [OK] to close the "Sounds and
Audio Devices Properties" screen.
Installing the PJO-20URs
in the conference room
Install the daisy-chained PJP-20URs by following the
examples below. Echo will be produced at the other end if
the PJP-20URs are placed too close to each other.
(4 units in a side-by-side arrangement)
Approximately
MIC
ZONE
2m
Approximately
MIC
ZONE
2m
Keep a distance of approximately 2m between the centers
of unit each placed in a side-by-side arrangement.
MIC
ZONE
Approximately 2m
MIC
ZONE
(4 units in a linear arrangement)
MIC
ZONE
MIC
ZONE
MIC
ZONE
MIC
ZONE
Keep a distance of approximately 2m between the centers
of unit each placed in a linear arrangement.
Adjusting the Volume
Note
Adjust the volume of "Yamaha PJP Cascade" when
adjusting the volume from the property screen of audio
device (When using Windows 7/Vista; Step 5-7, When
using Windows XP: Step 5). Device will not function
properly if you adjust the volume of "Yamaha PJP-20UR"
by mistake.
Adjusting the speaker volume
Adjust the speaker volume from PJP-20UR or PC.
Operating a PJP-20UR or computer reflects the operation
in other interlocked PJP-20URs.
Adjusting the microphone level
Adjust the microphone level from PC. Operating the PC
reflects the operation in all the interlocked PJP-20URs.
Muting the speakers/microphones
Mute the speakers/microphones from PJP-20UR or PC.
Operating a PJP-20UR or computer reflects the operation
in other interlocked PJP-20URs.
Approximately 2m
Approximately 2m
Approximately 2m
(May 2011)
Advertisement
