Toro 03626 Installation Instructions page 2

2
Installing the Clasps
Parts needed for this procedure:
4 Clasp
8 Clasp mount
8 Screw
8 Nut
Procedure
1. Measure the location to install the clasps on
each door as shown in
1. Installed clasp
2. Install the clasps on the
first row of "X" on the door.
3
Installing the Large Covers
Parts needed for this procedure:
1 Left door cover
1 Right door cover
Procedure
Note:
This procedure is for each door and rear opening.
Figure 1.
Figure 1
3. 27.13 cm (10-21/32
inches)
4. 58.72 cm (23-1/8 inches)
2. Install the clasps as shown in
1. Bolt
2. Clasp
g295828
2
Figure 2.
Figure 2
3. Clasp mount
4. Nut
g295829