Bosch FLEXIDOME panoramic 5100i User Manual
Hide thumbs
Also See for FLEXIDOME panoramic 5100i:
- Installation manual (32 pages) ,
- User manual (54 pages) ,
- Installation manual (32 pages)
Related Manuals for Bosch FLEXIDOME panoramic 5100i
Summary of Contents for Bosch FLEXIDOME panoramic 5100i
- Page 1 FLEXIDOME panoramic 5100i | FLEXIDOME panoramic 5100i IR NDS‑5703‑F360 | NDS‑5704‑F360 | NDS‑5703‑F360‑GOV | NDS‑5704‑F360‑GOV | NDS‑5703‑F360LE | NDS‑5704‑F360LE | NDS‑5703‑F360LE‑GOV | NDS‑5704‑F360LE‑GOV User manual...
-
Page 3: Table Of Contents
FLEXIDOME panoramic 5100i | FLEXIDOME Table of contents | en panoramic 5100i IR Table of contents Browser connection System requirements Establishing the connection Password protection in camera System overview Live Playback Configuration Dashboard Operation via the browser Live page Playback page 3.2.1... - Page 4 FLEXIDOME panoramic 5100i | FLEXIDOME en | Table of contents panoramic 5100i IR 4.5.3 Maximum Retention Time 4.5.4 Recording Scheduler 4.5.5 Recording Status 4.5.6 Recording Statistics 4.5.7 Image Posting 4.5.8 SD Card Status Alarm 4.6.1 Alarm Connections 4.6.2 Video Content Analysis (VCA) 4.6.3...
-
Page 5: Browser Connection
If you cannot connect, the unit may have reached its maximum number of connections. Depending on the device and network configuration, each unit can have up to 50 web browser connections, or up to 100 connections via Bosch Video Client or BVMS. Password protection in camera The device is password-protected. - Page 6 FLEXIDOME panoramic 5100i | FLEXIDOME en | Browser connection panoramic 5100i IR When you use Configuration Manager to access your device for the first time, you must set the initial password of the device in Configuration Manager. The Users section (General > Unit Access >...
-
Page 7: System Overview
Dashboard Click this icon to see detailed system information. Links Click this icon to navigate to the Bosch download store. Logout Click this icon to log out of the device. Click this icon to get context-sensitive help for the page you are browsing. -
Page 8: Dashboard
FLEXIDOME panoramic 5100i | FLEXIDOME en | System overview panoramic 5100i IR Click the Set and Reboot button. The camera reboots and the changed settings are activated. Dashboard The Dashboard page is used to display detailed information about the device. -
Page 9: Operation Via The Browser
To recall a stored pre-position, click a pre-position button. Digital I/O (Only applicable to FLEXIDOME panoramic 5100i IR) Depending on the configuration of the unit, the alarm input and the output are displayed next to the image. Expand the Digital I/O group if necessary. - Page 10 FLEXIDOME panoramic 5100i | FLEXIDOME en | Operation via the browser panoramic 5100i IR The alarm symbol is for information and indicates the status of an alarm input: – The symbol lights when the input alarm is active. The alarm output allows the operation of an external device (for example, a light switch or a door opener).
-
Page 11: Playback Page
FLEXIDOME panoramic 5100i | FLEXIDOME Operation via the browser | en panoramic 5100i IR This information can help with problem solving or when fine tuning the unit. For example: – if the storage activity is too high, change the recording profile, –... -
Page 12: Searching For Recorded Video
FLEXIDOME panoramic 5100i | FLEXIDOME en | Operation via the browser panoramic 5100i IR Select the Dewarping option. Click the Recording arrow to see the options. Select recording stream 1 or 2. 3.2.2 Searching for recorded video On the left side of the browser, expand the Search group if necessary. - Page 13 FLEXIDOME panoramic 5100i | FLEXIDOME Operation via the browser | en panoramic 5100i IR – Connection Status – Services You can also download a .JSON file with information about the device: At the bottom of the page, locate the Export button...
-
Page 14: Configuration
Certificate. A check mark in this check box indicates that at least one certificate is loaded onto the device. The Trusted certificate is a root certificate for Bosch Security Systems that proves that the device meets the following criteria: –... -
Page 15: Date/Time
5100i IR – It has not been tampered with. The Trusted certificate is issued by Escrypt. Escrypt is a Bosch company and Certificate Authority (CA). – Active Directory server (AD FS). A check mark in this check box indicates that the device uses an active directory server. -
Page 16: Web Interface
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR Note: It is important that the date/time is correct for recording. An incorrect date/time setting could prevent correct recording. Device time zone Select the time zone in which the system is located. - Page 17 FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Show VCA metadata When video content analysis (VCA) is activated, additional information is displayed in the live video stream. With the MOTION+ analysis type, for example, the sensor fields in which motion is recorded are marked with yellow rectangles.
-
Page 18: Live' Functions
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR – Smooth video: Allows the buffer to automatically adjust to cover network jitter, inducing higher latency. – No buffering: Shows video as it is received by the decoder with minimum latency. Allows the video to jerk if there is network jitter. -
Page 19: Connectivity
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Allow local recording Specify whether the icon for saving video sequences locally should be displayed below the live image. Video sequences can only be saved locally on your hard disk if this icon is visible. -
Page 20: Dyndns
The Sensor mode specifies how many images per second the sensor captures and also in what resolution it captures these images. (Only applicable to FLEXIDOME panoramic 5100i: NDS-5704-F360, NDS-5704-F360-GOV and FLEXIDOME panoramic 5100i IR: NDS-5704-F360LE, NDS-5704-F360LE-GOV) 2022-10 | V03 | F.01U.385.628 Bosch Security Systems B.V. -
Page 21: Display Stamping
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR You can also switch between single and multi-exposure (HDR) mode. Mirror image Select On to output a mirror image of the camera picture. Camera LED Click the Enabled or Disabled check-box to switch the Camera LED on or off. - Page 22 FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR If you have enabled the Transparent background option, the background color is not displayed in the OSD. Camera name stamping – Position Select the position of the camera name overlay in the drop-down box. It can be displayed at the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to Off for no overlay information.
-
Page 23: Positioning
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Stream security Select from the Video authentication drop-down box a method for verifying the integrity of the video. If you select Watermarking, all images are marked with an icon. The icon indicates if the sequence (live or saved) has been manipulated. -
Page 24: Scene Mode
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR Coordinate system Select the coordinate system and enter the appropriate values in the additional input fields that appear depending on the coordinate system selected. The Coordinate system feature describes the position of the camera in a local Cartesian or the global WGS 84 coordinate system. -
Page 25: Color
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Standard This mode is optimized for most standard scenes both indoor and outdoor. Sodium lighting This mode can be used in applications with street (sodium vapor) lighting. A special white balance algorithm compensates for the yellow / orange color of the lights. -
Page 26: Alc (Automatic Level Control)
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR – Standard auto mode allows the device to continually adjust for optimal color reproduction in an environment with natural light sources. – Sodium lamp auto mode allows the device to continually adjust for optimal color reproduction in an environment with sodium vapor light sources (street lighting). -
Page 27: Ir Illuminator
To reset this behavior, you need to switch the Day/night mode from Auto to a different option (Color or Monochrome), and then revert to Auto. 4.4.7 IR Illuminator IR function (Only applicable to FLEXIDOME panoramic 5100i IR) Select the control setting for IR illumination: – Auto: the camera automatically switches the IR illumination. –... -
Page 28: Enhance
5100i IR Intensity level region 1 to 5 (Only applicable to FLEXIDOME panoramic 5100i IR) The device has 5 controllable IR zones. You can individually control the intensity of the IR LEDs. To do so, adjust the sliders from 0 to +30. -
Page 29: Encoder Streams
If no edge recording or VRM recording is active, the device switches to the Non-recording profile. Please refer to section Non-recording profile. (Only applicable to FLEXIDOME panoramic 5100i: NDS-5703-F360, NDS-5703-F360-GOV and FLEXIDOME panoramic 5100i IR: NDS-5703-F360LE, NDS-5703-F360LE-GOV) Bosch Security Systems B.V. - Page 30 Profile 8 SD 3G Optimized Ideal for encoding on a 3G uplink where bit rate limitations are critical. (Only applicable to FLEXIDOME panoramic 5100i: NDS-5704-F360, NDS-5704-F360-GOV and FLEXIDOME panoramic 5100i IR: NDS-5704-F360LE, NDS-5704-F360LE-GOV) Profile number Default Profile name Description...
-
Page 31: Encoder Statistics
The Active profile follows the scheduled profiles under Recording Profiles. Please refer to section Recording Profiles. This behavior is only applicable when using Bosch recording solutions, including edge recording or VRM recording. Third-party recording solutions might use the Non-recording profile. -
Page 32: Privacy Masks
If you do not want any audio data to be transmitted, select Off. Audio Enable or disable the audio recording option. Audio input (Only applicable to FLEXIDOME panoramic 5100i IR) Select which audio input you want to use. Available options are Line In or integrated Microphone. Microphone volume Adjust the audio level with the slider(s). -
Page 33: Pixel Counter
Configuration | en panoramic 5100i IR Send audio (Only applicable to FLEXIDOME panoramic 5100i IR) Audio can be sent via the Send audio button if the unit supports audio. The button activates the audio backchannel connection. Click and hold the Send audio button to send an audio signal to the unit. - Page 34 FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR If the iSCSI destination is password protected, enter the password into the Password field. Click Read. – The connection to the IP address is established. The Storage overview field displays the logical drives.
-
Page 35: Recording Profiles
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Click OK to close the window. Wiping the storage media deletes all data without recreating a valid file structure. To wipe the recordings from the storage media: Click a storage medium in the Managed storage media list to select it. -
Page 36: Maximum Retention Time
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR Alarm recording Select a period for the Pre-alarm time from the list box. The RAM option allows the pre-alarm recording ring buffer to be stored in RAM as long as it fits, depending on bit rate settings. This avoids writing to the SD card or iSCSI. -
Page 37: Recording Status
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Click the No recordings profile in the Time periods box to deselect the intervals. Click Select All to select all of the intervals to be assigned to the selected profile. -
Page 38: Sd Card Status
A warning through the Video Management System If a SD card is not installed, ‘SD card not found’ is shown. Notice! Bosch recommends the use of industrial micro SD cards with health monitoring. 2022-10 | V03 | F.01U.385.628 Bosch Security Systems B.V. -
Page 39: Alarm
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Alarm 4.6.1 Alarm Connections In the event of an alarm, the unit can automatically connect to a pre-defined IP address. The unit can contact up to ten IP addresses in the order listed until a connection is made. -
Page 40: Video Content Analysis (Vca)
Detection of movement can be used to trigger an alarm and to transmit metadata. Various VCA configurations can be selected and adapted to your application, as required. Configure the VCA setting in the Bosch Configuration Manager. 4.6.3 Audio Alarm Alarms can be generated based on audio signals. -
Page 41: Alarm E-Mail
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Threshold Set up the threshold on the basis of the signal visible in the graphic. Set the threshold using the slide control or move the white line directly in the graphic using the mouse. -
Page 42: Alarm Inputs
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR 4.6.5 Alarm Inputs Active Configure the alarm triggers for the unit. Select N.C. (Normally Closed) if the alarm is to be triggered by opening the contact. Select N.O. (Normally Open) if the alarm is to be triggered by closing the contact. -
Page 43: Network
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Click Examples under the Alarm Task Editor field to see some script examples. A new window opens. Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your requirements. - Page 44 FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR Prefix length Enter the appropriate prefix length for the set IP address. Gateway address For the device to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here.
-
Page 45: Advanced
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Network MSS [Byte] Set the maximum segment size for the IP packet's user data here. This gives the option to adjust the size of the data packets to the network environment and to optimize data transmission. -
Page 46: Multicast
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR User name Enter the appropriate user name. Authentication protocol Select the appropriate authentication protocol: None, MD5, or SHA1. Authentication password Enter the appropriate password for authentication. Privacy protocol Select the appropriate privacy protocol: None, DES, or AES. -
Page 47: Ipv4 Filter
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Multicast Address Enter a valid multicast address to be operated in multicast mode (duplication of the data stream in the network). With a 0.0.0.0 setting, the encoder for the stream operates in multi-unicast mode (copying of data stream in device). -
Page 48: Service
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR Service 4.8.1 Maintenance Notice! Before starting a firmware update, make sure to select the correct upload file. Do not interrupt the firmware installation. Even changing to another page or closing the browser window leads to interruption. -
Page 49: Licenses
FLEXIDOME panoramic 5100i | FLEXIDOME Configuration | en panoramic 5100i IR Maintenance log Download an internal maintenance log from the device to send it to Customer Service for support purposes. Click Download and select a storage location for the file. -
Page 50: System Overview
FLEXIDOME panoramic 5100i | FLEXIDOME en | Configuration panoramic 5100i IR Download log Save a copy of the entries from the device to a computer. To save the entries: Click Download log; a dialog box appears. Enter a file name if required and save 4.8.5... -
Page 51: Troubleshooting
Search again for the IP address. Access the camera using the web browser. Set the initial password for the camera. For FLEXIDOME panoramic 5100i, the reset button is near the micro HDMI connection port. To access the reset button, remove the camera cover. Note that the reset button does not show the text RESET to prevent tampering. -
Page 52: Appendices
– Repair & Exchange – Product Security Bosch Building Technologies Academy Visit the Bosch Building Technologies Academy website and have access to training courses, video tutorials and documents: www.boschsecurity.com/xc/en/support/training/ 2022-10 | V03 | F.01U.385.628 Bosch Security Systems B.V. User manual... - Page 53 FLEXIDOME panoramic 5100i | FLEXIDOME Appendices | panoramic 5100i IR Bosch Security Systems B.V. 2022-10 | V03 | F.01U.385.628 User manual...
- Page 54 FLEXIDOME panoramic 5100i | FLEXIDOME | Appendices panoramic 5100i IR 2022-10 | V03 | F.01U.385.628 Bosch Security Systems B.V. User manual...
- Page 56 Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands www.boschsecurity.com © Bosch Security Systems B.V., 2022 Building solutions for a better life. 202210281506...