•
You might not have restarted the computer with the wireless
controller to have TCP/IP changes take effect. Restart the
computer.
•
The computer might be set to enable NetBIOS over TCP/IP.
Check that TCP/IP is set to use a static IP address of
192.168.0.210 and a subnet mask of 255.255.255.0. (The default
TCP/IP setting for Windows is to obtain an IP address
automatically.) Restart the computer.
After initial configuration, you cannot access the wireless controller at
its network address. Do the following:
•
Use the ping command to verify the connection.
•
Verify that the computer and wireless controller are on the same
VLAN.
•
Some of the wireless controller's default settings might not work
with your network. Check the wireless controller's default settings
against the configuration of other devices in your network.
15