Advertisement
LED
Description
2.4 Ghz
2.4 Ghz traffic on the WLAN.
5 Ghz
5 Ghz traffic on the WLAN.
The Discovery Wizard can discover access points that are either in
factory default state or already deployed and running. For the
Discovery Wizard to discover access points across a Layer 2
network, Layer 3 network (behind a router), or remote access points,
the following requirements apply:
•
Your network must have a DHCP server that has option 43
enabled with the IP address of the wireless controller, or the
DHCP server on the wireless controller must be accessible to all
access points.
•
Each access point must have an IP address.
•
Each access point must have SNMP and SSH enabled (which is
the default).
•
UDP port number 7890 must be unblocked by your firewall.
To discover access points:
1.
Access the wireless controller at the network IP address that you
configured (see
2.
Select Access Point > Discovery > Discovery Wizard.
Configure the Basic
13
Settings).
Advertisement
