3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the Smart Wizard.
Setting up WPA-PSK Security
Follow the steps below to configure WPA-PSK Security.
1. Run the WN311T Smart Wizard.
a. Make sure the WN311T software is installed and the WN311T is properly installed in a
PCI slot in your computer.
b. Use the
Figure 2-7
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
Network Connections and Wireless Security
NETGEAR RangeMax NEXT Wireless PCI Adapter WN311T User Manual
icon to open the Smart Wizard. The Settings tab page opens.
v2.0, February 2007
2-17