Bosch Smart Home controller II Quick Instructions page 4

The status LEDs (2, 3, 4) show the status of the control-
ler using flashing codes.
Power LED Status
Flashes yellow Device starting up
Lights green The device has started up
Flashes red Start-up failed
Network LED Status
Flashes yellow Searching for a network connection
Lights green Network connection established
Flashes red Network connection failed
Cloud LED Status
Update is being downloaded
from the Bosch Cloud or data is
Flashes yellow
being exchanged via the tunnel
connection.
Remote access via the Bosch
Lights green
Cloud is activated and established.
Bosch Cloud connection failed
and remote access to your Bosch
Flashes red
Smart Home system is not currently
possible.
Recommended action
Wait until the device has fully started up.
None
Disconnect the Smart Home controller from the power
and reconnect it. If the LED flashes red again, then
check the internet connection; connect the controller
to another network if possible.
Recommended action
None
None
Check your network settings.
Recommended action
None
If you do not want to access your Smart Home system
while out and about, then you can deactivate remote
access in the Smart Home app.
Disconnect the Smart Home controller from the power
and reconnect it. If the LED flashes red again, then
check the internet connection.