NETGEAR GA311 User Manual page 43

User Manual for the NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311
Install the GA311 Gigabit Ethernet Adapter.
Locate an available PCI slot in your
a.
computer.
Insert the card into the PCI expansion
b.
slot.
Note: To avoid damaging any
components on the card, handle it by the
edges, using your thumbs to push it
securely into the PCI slot. Do not use
excessive force, but make sure the card
is fully inserted into the slot to prevent
the PC operating system from freezing at
startup.
When you boot up the Windows system
c.
after installing the GA311 Gigabit
Ethernet Adapter, a Found New
Hardware Wizard dialog box appears,
indicating that Windows has found the
adapter. Click Next.
Insert the GA311 driver CD into your
d.
CD-ROM drive.
The install hardware device drivers
e.
dialog box appears. Select Search for a
suitable driver for your device
(Recommended). Click Next.
Manual Driver Installation
Found New Hardware Wizard
Search for a driver
B-5