NETGEAR EVA8000 User Manual page 13

The Digital Entertainer HD is compatible with all cables described in the
following table, though some cables are not included in the package.
Table 1-1. Rear Panel Description
Item
Wireless antennas
S/PDIF (audio)
coaxial port
Composite video and
stereo audio port
USB v2.0 port
Reset button
Power connector
SCART port
HDMI port
S-Video port
Component video
ports
S/PDIF optical audio
port
10/100 Mbps
Ethernet port with
LEDs
Note: The only inputs on the Digital Entertainer HD are the
USB ports, the Ethernet port, and the wireless antennas.
Compatible Equipment and Cables
Two wireless antennas are attached.
Sony/Phillips Digital Interface (S/PDIF) cable, also called
standard RCA type coaxial cable (not included).
Composite video and stereo audio cables (included),
which can be used with most televisions in the United
States.
USB mass storage devices such as hard drives, media
players (including Windows- or Mac-formatted Apple
iPods), and flash memory devices.
Reset the Digital Entertainer HD to its default factory
settings. To reset, press and hold the button down while
the unit is powering up. The Power LED blinks to
acknowledge the reset request.
IEC Digital Entertainer HD power cord (included).
SCART television cable (not included) that is widely used
in Europe and Australia.
High-Definition Multimedia Interface (HDMI) cable (not
included). If your television has an HDMI connector, you
can connect only this cable.
S-Video cable (included) that works with most televisions
in the United States.
Component video cable (not included).
Sony/Phillips Digital Interface (S/PDIF) for optical cable
(not included).
Cat 5 network cable (included in the package) that you
can use with this port to connect the Digital Entertainer
HD to a wired local area network (LAN).
1-5