Modifying Or Deleting An Existing Rule; Rules Status - NETGEAR WGT624 Reference Manual

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
• Incoming (Response) Port Range - enter the range of port numbers used by the remote system
when it responds to the PC's request.

Modifying or Deleting an existing Rule:

• Select the desired rule by clicking the radio button beside the rule.
• Click Edit or Delete as desired.
• Checking Operation and Status

Rules Status

To see which rules are currently being used, click the Status button. The following data will be
displayed:
• Rule - the name of the Rule.
• LAN IP Address - The IP address of the PC currently using this rule.
• Open Ports - the Incoming ports which are associated the this rule. Incoming traffic using one
of these ports will be sent to the IP address above.
• Time Remaining - The time remaining before this rule is released, and thus available for other
PCs. This timer is restarted whenever incoming or outgoing traffic is received.
6-6
202-10090-01, April 2005
Advanced Configuration