Before Mounting - Panasonic ET-JPF200BK Operating Instructions Manual

Before mounting

■ Use this product to install a compatible projector (not supplied) on the floor in a standing
position.
Compatible projectors: PT-JX200FBK / PT-JX200FWK / PT-JW130FBK / PT-JW130FWK
■ A work bench and a soft cloth to prevent scratches are required when mounting this product
to a projector.
z For PT-JX200F series
Prepare a bench for the mounting work with a height of at least 250 mm (9-27/32") and lay a soft cloth or the
like below the projector to prevent scratches.
z For PT-JW130F series
Prepare a bench for the mounting work with a height of at least 280 mm (11-1/32") and lay a soft cloth or the
like below the projector to prevent scratches.
■ For details such as the handling and operating procedures of the projector after this product
is mounted, refer to the operating instructions for the projector.
■ Disposal
When disposing of this product, ask your local authority or dealer about the correct disposal method.
6 - ENGLISH
Main unit
Soft cloth or alike
Bench to adjust height
(If necessary, use plate or corrugated cardboard)
Main unit
Soft cloth or alike
Bench to adjust height
(If necessary, use plate or corrugated cardboard)
Power supply unit
Soft cloth or alike
Workbench
(Table or box, etc.)
Base
Power supply unit
Soft cloth or alike
Workbench
(Table or box, etc.)
Base