NETGEAR ProSafe FVG318 Configuration Manual page 7

6. Click on My Identity on the left panel. On the right panel, select None under
Select Certificate. For ID Type, select Domain Name and enter <policy
name><digit>.fvg_remote.com where the policy name is the VPN policy name
you entered when configure VPN Wizard on the FVG318 and digit can be any
digit, it is being used to distinguish multiple VPN client user connected to the
FVG318 at the same time. In our example, the domain name will be
testvpn1.fvg_remote.com. Another VPN client user can use
testvpn2.fvg_remote.com as domain name. For Virtual Adapter, select Disabled.
Enter 0.0.0.0 for Internal Network IP Address. Select Any for Internet Interface.
If you cannot find Domain Name under ID Type, you may not have select
Aggressive mode under Security Policy as indicated on Step (5).