Main Screen> Switch Setting> Firmware Upgrade; Main Screen> Switch Setting> Exit; Figure 4-6. Main Screen: Switch Setting> Firmware Upgrade - NETGEAR FS526T User Manual

Main Screen> Switch Setting> Firmware Upgrade
Click Firmware Upgrade from the Switch Setting section. The following screen will pop up.
Firmware Path
o
Password
o
Upgrade State
o
Click Start to start upgrading.
Main Screen> Switch Setting> Exit
Click Exit from the Switch Setting section to close the GearDiscovery Utility program.
Figure 4-6. Main Screen: Switch Setting> Firmware Upgrade
The location of the new firmware. If you don't know, you can click Browse to locate file.
The default password is 'password'.
Show upgrading in progress.
Page 21 of 58