NETGEAR ProSafe FVS114 Reference Manual page 78

Reference Manual for the ProSafe VPN Firewall FVS114
3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next.
Figure 5-25: Remote IP
4. Identify the IP addresses at the target endpoint that can use this tunnel, and click Next.
Figure 5-26: Secure Connection Remote Accessibility
5-22
Enter the WAN IP address of the remote VPN
gateway:
(22.23.24.25 in this example)
Enter the LAN IP settings of the remote VPN
gateway:
• IP Address
(192.168.3.1 in this example)
• Subnet Mask
(255.255.255.0 in this example)
202-10098-01, April 2005
Basic Virtual Private Networking