The Fvs114 Rear Panel - NETGEAR ProSafe FVS114 Reference Manual

Vpn firewall
Hide thumbs Also See for ProSafe FVS114:
Table of Contents

Advertisement

Reference Manual for the ProSafe VPN Firewall FVS114
Table 2-1.
LED Descriptions
LED Label
PWR
TEST
INTERNET
100 (100 Mbps)
LINK/ACT
(Link/Activity)
LOCAL
100 (100 Mbps)
LINK/ACT
(Link/Activity)

The FVS114 Rear Panel

The rear panel of the FVS114 VPN Firewall contains the port connections listed below.
FACTORY DEFAULTS
Reset Button
Figure 2-2: FVS114 rear panel
Viewed from left to right, the rear panel contains the following features:
Factory default reset push button
Eight Ethernet LAN ports
Internet Ethernet WAN port for connecting the firewall to a cable or DSL modem
2-6
Activity
Description
On
Power is supplied to the firewall.
On
The system is initializing.
Off
The system is ready and running.
On
The Internet (WAN) port is operating at 100 Mbps.
Off
The Internet (WAN) port is operating at 10 Mbps.
On
The Internet port has detected a link with an attached device.
Blinking
Data is being transmitted or received by the Internet port.
On
The Local port is operating at 100 Mbps.
Off
The Local port is operating at 10 Mbps.
On
The Local port has detected a link with an attached device.
Blinking
Data is being transmitted or received by the Local port.
LOCAL
Ports
202-10098-01, April 2005
INTERNET
DC Power
Port
Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fvs114na

Table of Contents