Assembly - RIDGID OF150200A Operator's Manual

15 gallon portable air compressor
Table of Contents

Advertisement

Available languages

Available languages

ASSEMBLY

UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled
to the product by the manufacturer and require
customer installation. Use of a product that may
have been improperly assembled could result in
serious personal injury.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended
for use with this product. Any such alteration
or modification is misuse and could result in a
hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always disconnect the
engine spark plug wire from the spark plug when
assembling parts.
LOOSE PARTS LIST
See Figure 2, page 16.
The following items are included with the air compressor:
Key
No.
Description
1
Axle Bolt ..............................................................2
2
Flat Washer ..........................................................2
3
Hitch Pin ..............................................................2
4
Wheel ...................................................................2
Operator's Manual (not shown) ...........................1
INSTALLING THE WHEELS
See Figure 3, page 16.
NOTE: Do not connect the air compressor to a power supply
when installing the wheels. Make sure the pressure in the
tank is at 0 psi.
 Position the compressor as shown, on the floor or a stable
surface, with the gauges face down.
 Insert an axle through one of the tires. Add a washer as
shown. Slide a hitch pin through the hole in the bolt.
 Install the second tire. Make sure both tires are securely
installed.
 Set the air compressor upright.
9 – English
Qty.

Advertisement

Table of Contents
loading

Table of Contents