Canon MACRO TWIN LITE MT-26EX-RT Basic Operation Manual page 18

Hide thumbs Also See for MACRO TWIN LITE MT-26EX-RT:

Turning on the Power

To save battery power, the power will turn off automatically after approx.

90 sec. of idle use. To turn on the MT-26EX-RT again, press the

camera's shutter button halfway or press the test flash button (flash-

ready lamp).

When set as the master unit for radio transmission wireless multiple

flash shooting, the time until auto power off takes effect is approx. 5

min.

By setting the power switch to <LOCK>, you can disable the flash's

button and dial operations. It is useful when you want to prevent the

flash function settings from being accidentally changed after you set

them.

If you operate a button or dial, <

lleli~d•l

> is displayed on the LCD panel.

While the lock is active, the functions displayed above function buttons

1 to 4, such as <i*iifi> and<->, are not displayed.

Press the <LAMP> button to light the

focusing lamp for 20 sec., making

focusing easier. Press the button again

to turn off the lamp.

The focusing lamp turns off automatically

when you press the shutter button on the

camera completely.

Note that looking closely at the focusing lamp may cause vision damage.