To Change To Insert/Overwrite Mode; To Copy, Cut, Delete Or Replace Text; To Paste Cut/Copied Text - NEC 338 Product Manual

To change to delete/backspace mode, press the Options menu key, Editing options, then Delete or Backspace in Clear
mode.
In Delete mode, you can delete characters after the cursor. In Backspace mode, you can delete characters before the
cursor.

To Change to Insert/Overwrite Mode

To change to insert/overwrite mode, press the Options menu key, Editing options, then Insert or Overwrite in Write
mode.

To Copy, Cut, Delete or Replace text

To copy, cut, delete or replace a block of text, use the Copy/cut/others function. Before performing a specific function,
specify the text block:
To
1 Specify the starting point
2 Activate Copy/cut/other
3 Specify the ending point
The text block is specified. Do one of the following:
To
Copy
Cut
Delete
Replace

To paste cut/copied text

To paste cut/copied text, move the cursor using the 4-way navigation key to a specific point, and then press and hold the
key and press SK2 (Paste), or press the Options menu key and select Paste.
You can paste copied/cut text into other applications.
Entering Text
Do this
Move the cursor to the starting point using the 4-way navigation key.
Press and hold the key or press the Options menu key and then select
"Copy/cut/other".
Move the cursor to the end using the 4-way navigation key.
Do this
Press SK1(Copy), or press the Options menu key and select Copy.
Press SK2(Cut), or press the Options menu key and select Cut.
Press the Options menu key and select Delete.
Press the Options menu key and select Replace. As a result, the selected text is
replace by the text on a clip board.
-36-