To Edit An Alarm; To Change Alarm Clock Status; To Delete Alarms - NEC 338 Product Manual

To Edit an Alarm

To edit your alarm clock setting, press the SK1 (Edit) and edit. Follow the instructions in To Set an Alarm on page 115.

To Change alarm clock status

You can change alarm clock status on/off/disable on the Alarm clock list screen. Select an alarm on the list and do the
following:
To
1 Set alarm clock status

To Delete Alarms

To
Delete an alarm
Delete all the alarms
Do this
To change the alarm clock status from On to Disable, press the SK2
(Disable).
To change the alarm clock status from On to Off, press the SK2 twice
(SK2 (Disable) -> SK2 (Off))
Disable cancels the next alarm but does not cancel a recurring alarm.
Off deactivates the set alarm.
Disable is available only for recurring alarms and cannot be set for
alarms without the Repeat setting.
Do this
Select an alarm clock from Alarm1 to Alarm5. Press the Options
menu, select Delete and press the Enter key. Select Delete and press
the Enter key.
Press the Options menu, select Delete and press the Enter key. Select
Delete all and press the Enter key.
-117-
Using the Toolbox