Front Brake Disc Removal And Installation; Front Brake Disc Inspection - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:
Table of Contents

Advertisement

4B-8 Front Brakes:
Piston Seal
Excessive or uneven wear of pad lining may indicate
unsmooth return of the piston. In such a case, replace
rubber seal.

Front Brake Disc Removal and Installation

Removal
1) Hoist vehicle and remove front wheel.
2) Remove caliper assembly (2) by loosening caliper
carrier bolts (1) (2 pcs).
CAUTION
!
During removal, be careful not to damage
brake flexible hose and not to depress brake
pedal.
NOTE
Hang removed caliper with a wire hook or the
like so as to prevent brake hose from
bending and twisting excessively or being
pulled.
IYSQ01420023-01
S6JB0A4206008
1
2
I5JB0A420010-01
3) Remove disc by using 8 mm bolts (1) (2 pcs).
Installation
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Tighten caliper carrier bolts (1) to specification.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
4) Install wheel and lower vehicle.
5) Tighten wheel nuts to specified torque.
Tightening torque
Wheel nut: 100 N·m (10.0 kgf-m, 72.5 lb-ft)
6) Upon completion of installation, perform brake test.

Front Brake Disc Inspection

Inspect front brake disc, referring to "Front Brake Disc
and Pad Inspection".
IYSQ01420025-01
1,(a)
I5JB0A420011-01
S6JB0A4206009

Advertisement

Table of Contents
loading

Table of Contents

Save PDF