Pre-Assembly - Horizon Fitness 5.0IC Owner's Manual

MAIN PARTS INCLUDED:
Main Frame (20)
Front Stabilizer (21F)
Rear Stabilizer (21R)
Handlebar Set (22)
Handlebar Post (23)
Console (29)
Pedal Set (34 L&R)
Seat Post Set (31, 32 & 33)
PARTS PACKING
INCLUDED:
1 Hardware Kit
1 Owner's Manual
HARDWARE KIT:
1
Bolt
M8
Qty: 7
4
Bolt
M4
Qty: 3
PRE ASSEMBLY
UNPACKING
Due to the weight of the indoor cycle, it is recommended that two people
perform the assembly. Unpack the product where you will be using it. It is
recommended that you place a protective covering on your floor. Place the carton
on a level flat surface and remove all packing materials; do not dispose of the
packing materials until assembly is completed.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
NEED HELP?
2
Spring Washer
Ø8.2
Qty: 7
5
Flat Washer
Ø10.0
Qty: 1
If you have questions or if there are any missing
parts, contact Customer Tech Support. Contact
information is located on the back panel of this
manual.
3 Tool Kit
Flat Washer 5mm Wrench
Ø8.2 13/15mm Wrench
Qty: 7 Screwdriver
9