Maintenance Schedule; After Each Use; Before Each Use - Horizon Fitness 5.0IC Owner's Manual

MAINTENANCE
What kind of routine maintenance is required?
Minimal maintenance and cleaning is required. We use sealed bearings throughout our bikes so lubrication is not needed.
The most important maintenance step is to simply wipe your perspiration off the bike after each use.
How do I clean my bike?
Clean with mild soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your bike and its operating
environment will keep maintenance problems and service calls to a minimum. For this reason, we recommend that the
following preventive maintenance schedule be followed.

MAINTENANCE SCHEDULE

AFTER EACH USE

Clean the indoor cycle using soft cloths or paper towels or other gentle solution (cleaning agents should be alcohol and
ammonia free). Disinfect the saddle and handlebars and wipe off all bodily residues.

BEFORE EACH USE

Make sure that the indoor cycle is level and does not rock. Ensure that the pedals are tight in crank arms and not cross-
threaded, all screws on pedals are tight, and pedal straps are not frayed.
BI-WEEKLY
Test the emergency brake to make sure it is functioning properly. To do this, press down the red emergency brake lever
while pedaling. When functioning properly, it should immediately slow down the flywheel until it comes to a complete stop.
MONTHLY
Inspect all assembly bolts and pedals on the machine for proper tightness.
Adhering to this schedule will extend the life of your machine.
24