Table of Contents
Advertisement
1
Introduction
1.1
Preface
The HVC-R product line is the new ABB solution for Overnight Charging of Heavy Vehicles. The prod-
uct line allows 107kW and 160kW charging with up to 3 charging outlets per one charger. The charg-
ing of the vehicles is done sequentially following the first come, first serve principle.
A. First Bus 1 starts charging with 160kW full power, using Depot box 1. When bus 1 is full it
stops charging.
B. Then Bus 2 charges with 160kW until full using Depot box 2. Charging stops.
C. Then Bus 3 charges with 160kW until full using Depot box 3. Charging stops.
D. Finally Bus 4 charges with 160kW until full using Depot box 4. Charging stops.
This manual describes the general usage and daily operation instructions of the HVC-R product fam-
ily.
1.2
Intended use of this document
This document serves:
•
As a reference for site operators who are responsible for the charger's operation on site, per-
forming daily inspection and maintenance activities and who are able to perform simple trou-
ble shooting activities, after instruction of a certified ABB technician.
As a reference to the operator's customers, the EV drivers who will mainly use the pictograms
•
and texts on the display of the charger. The user interface design was thoroughly evaluated
with user groups to optimize understandability and to get the best user experience. Besides
the screens needed for the charging process, the interface has help screens available to pro-
vide additional information.
1.3
Intended use of the charger
The HVC-R product is a stand-alone DC high power charger for electric buses and trucks. The outlets
of the charger must not be used to charge any other equipment than electric vehicles compatible with
the supported charging standards.
D O C U M E N T N O. : 9 A K K 10 8 4 67 A 6 6 3 5 - E N V 0. 3 | D AT E : 2 0/ 1 2 / 2 0 2 2
H V C - R 1 0 7 / 1 6 0 V 2 E -B U S C H A R G E R - U S E R M A N U A L
PA G E 5 O F 2 0
Advertisement
Table of Contents
