Running Applications Over Packet Data; Ending A Packet Data Call - Motorola iM1000 User Manual

Running Applications over Packet Data

You can run any standard TCP/IP application during a packet data session.
To start a packet-data session, double-click the iX1000 Packet Data Service
icon.
When a packet-data session is active, your service provider
is your iDEN carrier and not an Internet service provider.
This means that any software specifically configured for use with other
service providers may be required to be reconfigured for use with your
iDEN carrier.

Ending a Packet Data Call

To end a packet data call:
Figure 65. iDEN Status Window
• If the status window is open, click the button marked X at the upper right
corner of the iDEN Status window. This disconnects your modem from
the network and closes the status window.
• If the status window is closed, click the modem icon on your desktop
taskbar to open the status window. Then click the X at the upper right
corner of the iDEN Status window.
Starting the Internet Connection
N O T E
51