Casio CP-2575 Owner's Manual

CP-2575/CP-2070 US OG Preliminary Text
March 17, 2000
Red highlight = new change
Green highlight = questionable change
CP-2575/CP-2070
EASY TO USE OWNER'S GUIDE
2.4 GHz CORDLESS PHONE WITH CALL WAITING CALLER ID
Charge the Handset battery
Before Using the Cordless Telephone
The battery loses its charge during shipping and storage. Be sure to charge the battery before you use the CP-
2575/CP-2070 cordless telephone. Place the handset in the base unit. The CHARGING INDICATOR on the
base will light. Leave the handset in the base unit for 12-15 hours.
Optimize the 2.4 GHz Cordless Performance
For maximum distance and noise free operation, place the base unit away from electrical appliances.
Place the base unit in a central location with no obstructions such as walls. If you experience interference
while using the handset near other electrical appliances or other cordless phone base units, move away from
the electrical appliance or other cordless phone base unit and closer to the CP-2575/CP-2070 base unit.
Digital Security Code
The Digital Security Coding System automatically resets a new personal security code, to one of over 64,000
combinations, every time you return the CP-2575/CP-2070 handset to the base unit. (Whenever the handset is
returned to the base unit, you will hear a beep.) The security code prevents unauthorized use of your
telephone line, false rings and false dialing.
INSTALLATION
WARNING: This unit is not shipped with the handset battery installed. Please install and charge the
handset battery pack before initial setup and use.
PLUG the CP-2575/CP-2070's telephone cord into a telephone wall jack. Plug the other end of the cord into
the back of the base unit.
CONNECT the AC Adapter Plug into the AC Adapter Outlet on the back of the CP-2575/CP-2070 charging
cradle. LOOP the cord through the AC Adapter Cord Holder to prevent accidental disconnection.
PLUG the AC Adapter into an electrical wall outlet. Place the handset (with battery pack installed) in the
cradle.
It may be necessary to set the TONE/PULSE SWITCH.
Raise the charging cradle
antenna for clear reception.
INITIAL SETUP
WALL/DESK USE
A wall mount bracket is included and can be installed if needed. Tightly coil the telephone cord around the
four guides on the inside of the wall mounting bracket. Pull the telephone cord through the center opening on
the wall mounting bracket. Refer to the drawing. The handset can be charged face out or face down, even
when wall mounted.
Tone/Pulse Switch
This switch tells the CP-2575/CP-2070 to dial out with either touchtone or pulse signals to match the service
you have with your local telephone company. The CP-2575/CP-2070 is shipped with the TONE/PULSE
SWITCH in the TONE position. If you do not have touchtone service, set the switch to pulse on the back of
the charging cradle.
TONE = for Touchtone systems
PULSE = for Rotary dialing or Pulse systems
Ringer On/Off
The CP-2575/CP-2070 is shipped with the handset RINGER ON/OFF SWITCH in the ON position and the
base RINGER OFF/LOW/HIGH SWITCH in the HIGH position. You can independently set the ringers of
the CP-2575/CP-2070.
IMPORTANT FEATURES
2.4 GHz Hybrid Cordless Technology
CP2575 M1S1 OG.doc 1